dsibbo Posted November 6, 2008 Share Posted November 6, 2008 Can you set the height & width of the Structural Beams & Structural Braces. I have the option to change the "logical length" which does exactly that. But nothing for height of width. Any Ideas?? Cheers Quote Link to comment Share on other sites More sharing options...
dumfatnhappy Posted November 14, 2008 Share Posted November 14, 2008 Can you set the height & width of the Structural Beams & Structural Braces. I have the option to change the "logical length" which does exactly that. But nothing for height of width. Any Ideas?? Cheers pick the 'correct' beam size Quote Link to comment Share on other sites More sharing options...
LifeoRiley0 Posted November 18, 2008 Share Posted November 18, 2008 I just figured this out recently during a big coordination job. Go to Format > Structural Members > Wizard and follow the steps and save as W12 or whatever. Then Go to the Design pulldown > Structural Members > Add beam. Then in the properties pallette you can select the style (W12) and elevation for the beam. Hope this helps..... Quote Link to comment Share on other sites More sharing options...
dumfatnhappy Posted November 18, 2008 Share Posted November 18, 2008 Can you set the height & width of the Structural Beams & Structural Braces. I have the option to change the "logical length" which does exactly that. But nothing for height of width. Any Ideas?? Cheers I go to tool pallettes and depending on your UCS you can insert it in plan or elevation. Then I extrude it to the length I need. This may ne a combersome way to do it but until I'm taught different it'll do. :wink: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.