iamlegend Posted February 2, 2009 Share Posted February 2, 2009 Just bought autocad 2009, installed it etc etc. when i launch i get a fatal error: unhandled access violation reading 0x0000 at 60c068h Could not load plcfmg.dll Anyone know what too do? Quote Link to comment Share on other sites More sharing options...
arjun_samar Posted February 2, 2009 Share Posted February 2, 2009 first, welcome to the forum.... ok.. some fatal error occurs? i guess you should re-install the software again.. then try it. if the problem still occurs.. i dont know anymore of that maybe someone here might help you.. but you could give it a shot.. just try to re-install it.. hope it may help Quote Link to comment Share on other sites More sharing options...
LifeoRiley0 Posted February 2, 2009 Share Posted February 2, 2009 Have you contacted your distributor? Does your computer meet all the specs required? Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 2, 2009 Share Posted February 2, 2009 I searched my AutoCAD 2009 folder, my Documents and Settings folder and my Windows folder and could not find the file that you mention (plcfmg.dll). I even "Googled" the file name and the only worthwhile mention of it was a link back to your post. Is it a file on the installation disk itself? Part of the installation process? Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 2, 2009 Share Posted February 2, 2009 Errors like this can occur if AutoCAD is not installed properly. As previously suggested you may have to uninstall and then reinstall AutoCAD. Other possibilities include: -a virus. -a conflict with your anti-virus program (which one are you running?). -a conflict with another application? What else is running in the background other than your anti-virus program? By the way, after you loaded AutoCAD did you load service pack 2? Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 3, 2009 Share Posted February 3, 2009 iam: Did you get this problem fixed or what? Quote Link to comment Share on other sites More sharing options...
iamlegend Posted February 3, 2009 Author Share Posted February 3, 2009 sorry for the late reply folks, managed to get this working, just reinstalled, no idea what went on. Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 3, 2009 Share Posted February 3, 2009 Well at least you're back up and running. That's what counts. Thanks for the update. Quote Link to comment Share on other sites More sharing options...
dewain0606 Posted June 27, 2009 Share Posted June 27, 2009 2009 works better on 64 bit vistas Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.