Mr T Posted October 3, 2005 Share Posted October 3, 2005 ___ INVENTOR FAQ_ OCTOBER 03, 2005 ___ ____________________________________________________________________ New 10/03/05 Added Multiple Hotfixes for R10 AIS and AIP. Also Augi Inventor Group Link. 09/14/05 Added Q/A about Constraint Noise 08/15/05 Added R10 Sketched Symbol Hotfix 08/15/05 Added Vault4 SP2 link 08/04/05 Added 2 Hotfixes for R10 ____________________________________________________________________ ### Table of Contents 1. Introduction and Rules & Regulations for the groups 2. List of all the Inventor Support Newsgroups (web & newsreader) 3. Frequently Asked Questions about R6/7/8/9 4. List of Inventor Websites and Resources 5. Bug Submission 6. Common Acronyms Used in the Newsgroups PLEASE DO NOT CROSS POST TO MULTIPLE GROUPS. The exception to this rule is information that applies to all releases ### 1.Introduction -------------------------------------------------------------------- Welcome Inventor users, Below are a list of several resources to help with your use of Autodesk Inventor. There is a lot of good information listed on these sites. Answers to the more frequently asked questions can be found in these links. If, after reviewing these sites, you still do not find the answer to your questions please feel free to post in the newsgroup. There are a lot of experienced users that will be more than happy to help you out if possible. PLEASE DO A SEARCH OF THE GROUP FIRST(see below). YOUR QUESTION HAS PROBABLY ALREADY BEEN ANSWERED. Please be descriptive in your topic subjects. Subjects like "Inventor Problems" or "HELP!" do not lend much insight and are often skipped over. A topic such as "How do I loft several non-parallel sketches" is much more helpful. As some newsreader programs cannot display HTML formatted messages correctly, please be sure to post your messages in plain text format. Most newsreaders have an option to format the messages in this manner. If you are having display or crashing related issues please list your machine's specs: Processor, RAM, Operating System, Video Card, IV release & SP #. While it may not be due to these factors it helps to determine the cause. When posting files please move the end of part marker to the top of the file and zip the files to save space. The posting limit is approximately 1MB (see below for larger files) ------------------------------------------------------------------- ### 3. Frequently Asked Questions about R6/R7/R8/R9/R10 -------------------------------------------------------------------- Q) Where can I find All Service Packs and Updates A) For AIS: http://www.autodesk.com/inventor-updates For AIP: http://www.autodesk.com/inventorpro-updates -------------------------------------------------------------------- R6 (R6SP1) http://support.autodesk.com/getDoc.asp?id=DL403697 (R6SP2) http://support.autodesk.com/getDoc.asp?id=DL403916 -------------------------------------------------------------------- R7 (R7SP1) http://support.autodesk.com/getDoc.asp?id=DL404054 -------------------------------------------------------------------- R8 (AIS SP1) http://support.autodesk.com/getDoc.asp?id=DL3916489 (AIP SP1) http://support.autodesk.com/getDoc.asp?id=DL3916516 Hot Fix- Ghost reference to a file no longer present in the assembly http://support.autodesk.com/getDoc.asp?id=DL5074396 -------------------------------------------------------------------- R9 Hot Fix - Constraints not honored during drag http://support.autodesk.com/getDoc.asp?id=DL4517951 Hot Fix - Mirror or copy a part that is constrained to another causes instability http://support.autodesk.com/getDoc.asp?id=DL4572763 Hot Fix - Unable to save IDW files create in previous versions of Autodesk Inventor http://support.autodesk.com/getDoc.asp?id=DL4592232 Hot Fix - 3D DWF publish from weldment assembly can cause instabilty http://support.autodesk.com/getDoc.asp?id=DL4599241 Hot Fix - Package Files cannot be viewed in the Streamline Express Viewer 5 http://support.autodesk.com/getDoc.asp?id=DL4583293 Hot Fix - Find Files not working in Design Assistant http://support.autodesk.com/getDoc.asp?id=DL4782486 Hot Fix - Heap Errors opening IDW's and Prompted Text changing order http://support.autodesk.com/getDoc.asp?id=DL4863911 Update to Inventor Style Library Colors http://support.autodesk.com/getDoc.asp?id=DL4938649 HotFix - OLE Objects not visible in Stand Alone Design Tracking http://support.autodesk.com/getDoc.asp?id=DL5126862 Hotfix - Deleting a Feature Can Cause Unrelated Workaxes to be Deleted http://support.autodesk.com/getDoc.asp?id=DL5126877 Hotfix - Inventor May Resolve to Files Located Outside of the Project File http://support.autodesk.com/getDoc.asp?id=DL5156472 Hotfix - Assembly Mirror Command Will Disassemble Parts from Mirrored Sub-Assembly http://support.autodesk.com/getDoc.asp?id=DL5273126 Hotfix Errors When Exporting IDW Files to DWG http://support.autodesk.com/getDoc.asp?id=DL5297489 Hotfix - Some IDW Files Cannot Be Opened After Migration to Autodesk Inventor 9 Service Pack 2 http://support.autodesk.com/getDoc.asp?id=DL5304025 Hotfix - Parts With iMates Move When Made Adaptive http://support.autodesk.com/getDoc.asp?id=DL5304048 Hotfix - Excel and/or Autodesk Inventor 9 May Become Unstable When Editing iParts http://usa.autodesk.com/getdoc/id=DL5530111 Hotfix - Performance slows when using the project cut feature through a pattern http://usa.autodesk.com/getdoc/id=DL5530559 Security Update - Local User Access http://usa.autodesk.com/getdoc/id=DL5549329 (AIS SP1) http://usa.autodesk.com/getdoc/id=DL4663449 (AIS SP2) http://usa.autodesk.com/getdoc/id=DL5061691 (AIS SP3) http://usa.autodesk.com/getdoc/id=DL5061691 AIS SP4) http://usa.autodesk.com/getdoc/id=DL5711670 (AIP SP1) http://usa.autodesk.com/getdoc/id=DL5512389 (AIP SP2) http://usa.autodesk.com/getdoc/id=DL5064599 (AIP SP3) http://usa.autodesk.com/getdoc/id=DL5516269 (AIP SP4) http://usa.autodesk.com/getdoc/id=DL5711704 -------------------------------------------------------------------- R10 Security Update - Local User Access http://usa.autodesk.com/getdoc/id=DL5549329 Hotfix - Placing hole table of sheet metal parts may cause instability http://usa.autodesk.com/getdoc/id=DL5530484 (AIS SP1) http://usa.autodesk.com/getdoc/id=DL5596411 Hotfix - Instability on Start-Up with Custom Add-Ins Loaded http://usa.autodesk.com/getdoc/id=DL5645485 Hotfix - Automatic Merging of Rows Based on Part Number Matching http://usa.autodesk.com/getdoc/id=DL5707935 Hotfix TS1052512 - Instability When Previewing Graphics Using Custom Addin Yippee http://usa.autodesk.com/getdoc/id=DL5782486 Hotfix TS1052616 - Missing Line Geometry When Exporting Views of iParts to DWG http://usa.autodesk.com/getdoc/id=DL5751181 Hotfix - Edit Definition of Sketched Symbol Causes Autodesk Inventor to Become Unstable http://usa.autodesk.com/getdoc/id=DL5800111 Hotfix - Multiple Translation issues (French Only) http://usa.autodesk.com/getdoc/id=DL5904294 Customize User Interface (CUI) Update http://usa.autodesk.com/getdoc/id=DL5571150 Hotfix - Multiple issues in Design Accelerator (Localized versions Only) http://usa.autodesk.com/getdoc/id=DL5904321 Hotfix Master Representaion in Sub-Assembly & Other Issues (Non-English Versions Only) http://usa.autodesk.com/getdoc/id=DL5942659 Hotfix - Autodesk Inventor 10 Constraints Flash Demo http://usa.autodesk.com/getdoc/id=DL5784860 Hotfix - Autodesk Activation Update http://usa.autodesk.com/getdoc/id=DL5620053 AIP Specific Hotfix - Report Generator Output Missing Pin Names (French Only) http://usa.autodesk.com/getdoc/id=DL5658699 Hotfix - Inventor constraints may be lost after replace fitting http://usa.autodesk.com/getdoc/id=DL5842457 Hotfix to address translation issues in Inventor Professional http://usa.autodesk.com/getdoc/id=DL5904285 Hotfix - Multiple issues in Design Accelerator (Localized versions only) http://usa.autodesk.com/getdoc/id=DL5904321 Hotfix - Master Representation in Sub-Assembly & Other Issues (Non-English Versions Only) http://usa.autodesk.com/getdoc/id=DL5942659 Autodesk Inventor Quote Link to comment Share on other sites More sharing options...
Lewis C Posted August 7, 2012 Share Posted August 7, 2012 Thank you for all this info! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.