cpascual Posted August 2, 2010 Share Posted August 2, 2010 I want to perform an extrusion on the following shape, but I am unable to perform the BOUNDARY command so that I can convert the shape to a surface. It a closed polyline but it still is not working. Can anyone give me any suggestions on how to fix this problem or should I being doing this another way to extrude the shape? Thanks for the help. Quote Link to comment Share on other sites More sharing options...
MSasu Posted August 2, 2010 Share Posted August 2, 2010 Probably is a self-overlapping shape; explode it and start erasing the segments one by one - may found that somewhere you have more entities than you expect. Remove those trouble-maker items, re-create the polyline and try to extrude it again. By the way, you can extrude the polyline directly, don't need to convert it in boundary. Regards, Quote Link to comment Share on other sites More sharing options...
cpascual Posted August 2, 2010 Author Share Posted August 2, 2010 Sweet. You were right, all I had to do was extrude the polyline. Thanks for the help. Quote Link to comment Share on other sites More sharing options...
MSasu Posted August 2, 2010 Share Posted August 2, 2010 You're welcome! Glad to help you. Regards, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.