Gratitude1977 Posted November 4, 2010 Share Posted November 4, 2010 Hi all, I posted a couple of days ago regarding the scaling of symbols for my standard library and was told they should always be at 1:1. After speaking with my boss again it was made clear to me that I do not need to have the symbols scaled but rather somehow using the userr command make it so that once I create my drawing in model space and then in paper space have the scale set to for example 1-10 create a button that would automatically set the blocks upon insertion to that scale. I could use any help in how to create this. Acad 2005. Thanks again for the help guys! Quote Link to comment Share on other sites More sharing options...
Tiger Posted November 4, 2010 Share Posted November 4, 2010 Do you place the blocks in Model Space or in Paper Space? Quote Link to comment Share on other sites More sharing options...
Gratitude1977 Posted November 4, 2010 Author Share Posted November 4, 2010 Sorry about not being clear. The blocks are being used in model space. I have created all the blocks and made buttons and flyouts for them. Just need this to complete the standards in the office. Thanks again. Quote Link to comment Share on other sites More sharing options...
BIGAL Posted November 8, 2010 Share Posted November 8, 2010 If in model space they should be at 1:1 plot from paperspace. Your drawing should be 1:1 Also ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.