tennis4you Posted June 16, 2011 Share Posted June 16, 2011 I replaced a title sheet (I could have sworn in the exact same spot). Now when I open a file the title block is shifted outside of the layout area. I move everything back into place and plot it. Right after it plots everything shifts again. I tried detaching and re-attaching the title sheet but that did not help. Is something else causing this? Thanks! Quote Link to comment Share on other sites More sharing options...
t1320t Posted June 16, 2011 Share Posted June 16, 2011 Are you plotting a "window" or a "layout"? You may need to check "center the plot". Quote Link to comment Share on other sites More sharing options...
irneb Posted June 16, 2011 Share Posted June 16, 2011 Yep, also check the plot offset at the bottom of the plot/layout dialog. This usually varies automatically when you select another plotter - to adjust for varying bleed margins. BTW, center is only available if you go with Extents/Window. With Layout you either adjust the offset or move your TB to suit. Quote Link to comment Share on other sites More sharing options...
tennis4you Posted June 16, 2011 Author Share Posted June 16, 2011 I am printing to "Extents" and I have "Center the Plot" checked. I just moved on to another job and that title block is shifted from the title block as well!!! Why is this happening!!! I have not changed the plot driver or anything, it is forcing the plot to print not to scale since part of the title sheet is outside of the layout. This is really weird. It is also holding up clients. Quote Link to comment Share on other sites More sharing options...
tennis4you Posted June 16, 2011 Author Share Posted June 16, 2011 OK, I rebooted the pc (not just AutoCAD this time) and it seems to have fixed the problem for now. I will let ya know if it happens again. Fingers crossed... Quote Link to comment Share on other sites More sharing options...
tennis4you Posted June 16, 2011 Author Share Posted June 16, 2011 --------------------- Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.