afrazawan Posted November 16, 2011 Share Posted November 16, 2011 i want to creat hatch pattren own my choice how can please im using Auto cad 2012 thanks Quote Link to comment Share on other sites More sharing options...
ReMark Posted November 16, 2011 Share Posted November 16, 2011 With enough searching almost anything can be found. Here is my detailed response to an earlier question much like yours. One option, since you are using a full version of AutoCAD, is to use the SuperHatch command found in Express Tools under Draw. A second very similar option is HatchMaker.lsp by Larry Schiele published 01-October-2005 in Cadalyst magazine. See this: http://cadtips.cadalyst.com/patterns/hatch-maker Option three is to crack open your Customization Guide and read up on what is involved in creating custom hatch patterns. There is a definite method to be followed. Option four. Check out HatchKit v2.7 here: http://www.hatchkit.com.au/ A fifth option is this tutorial by Ellen Finkelstein on creating your own custom hatch pattern. http://www.ellenfinkelstein.com/auto...m_hatches.html Sixth and final option for you. Ralph Grabowski's three part lesson (#12, #13 and #14) about the Hatch command and how to create a custom pattern. The link to the next chapter is at the bottom of each page. To lesson #12: http://www.upfrontezine.com/tailor/tailor12.htm Now, go create a custom hatch pattern then come back and impress us with your new found knowledge. I'll expect you to share it with us as payment for providing you with all these options. Don't let us down. Stop reading and start creating. Now! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.