col1n Posted July 1, 2012 Share Posted July 1, 2012 Hi Guys, new to AutoCAD and also this forum. I have text that I want to be able to plot at vaious different scales. I added annotative text in model space and scaled at 1:20, 1:50, 1:100 and 1:125. The scale is set at 1:125 in model space. If I set my viewport scale at anything other that 1:125 I either get mutiple versions of the text all over the place and / or very small versions of teh text offet from where I placed them in model space. What the devil am I doing wrong ? Quote Link to comment Share on other sites More sharing options...
Organic Posted July 1, 2012 Share Posted July 1, 2012 From the sounds of it you are doing it right. The multiple versions of different sizes appearing in model space can be turned off (I can't member the command currently though). The text appearing offset/in slightly different positions when in different viewports at different scales is the big problem I have with annotative scaling and why I don't use it personally. Quote Link to comment Share on other sites More sharing options...
dirkvandonkelaar Posted July 1, 2012 Share Posted July 1, 2012 I can't member the command currently though the command is "annoallvisible" you need to set this to 0. When you had this set to 1, try to set it to 0, maybe your problem is solved. Quote Link to comment Share on other sites More sharing options...
Dadgad Posted July 2, 2012 Share Posted July 2, 2012 the command is "annoallvisible" you need to set this to 0. When you had this set to 1, try to set it to 0, maybe your problem is solved. Welcome to the forum. dirk nailed it. You might want to read the yellow highlighted text in the attached image though, for future reference. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.