Pam Robinson Posted February 27, 2013 Share Posted February 27, 2013 Does anyone have some customized linetypes for RW, PL, and so on that I can use? Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 27, 2013 Share Posted February 27, 2013 Since what you are doing looks relatively straight-forward why not create your own based on one of the standard linetypes that ships with AutoCAD? Quote Link to comment Share on other sites More sharing options...
Pam Robinson Posted February 27, 2013 Author Share Posted February 27, 2013 Sure I can give that a shot. Quote Link to comment Share on other sites More sharing options...
Pam Robinson Posted February 27, 2013 Author Share Posted February 27, 2013 Just had a quick job to get out and we got new computers at work, so all my customization files were not carried over. Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 27, 2013 Share Posted February 27, 2013 A very quick linetype based upon one of AutoCAD's standard linetypes. I need to adjust the spacing a tad to enlarge the gap after the "W" but you get the idea right? Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 27, 2013 Share Posted February 27, 2013 Just had a quick job to get out and we got new computers at work, so all my customization files were not carried over. Things like that should be on a flash drive you carry on your person. Think of it as insurance. Quote Link to comment Share on other sites More sharing options...
Pam Robinson Posted February 27, 2013 Author Share Posted February 27, 2013 There's not much time these days to think outside of what your doing, pretty busy. Thanks for all the tips. Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 27, 2013 Share Posted February 27, 2013 What if your hard drive had crashed instead? Quote Link to comment Share on other sites More sharing options...
Pam Robinson Posted February 27, 2013 Author Share Posted February 27, 2013 I get it! Thanks Quote Link to comment Share on other sites More sharing options...
SLW210 Posted February 27, 2013 Share Posted February 27, 2013 You can copy linetypes from a drawing, no need for a .lin file. Just copy the line from another drawing. At one time there were some LISP routines that would create .lin from the drawing files. Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 27, 2013 Share Posted February 27, 2013 Extracting linetypes from a drawing. http://www.cadtutor.net/forum/showthread.php?70866-Options-for-extracting-linetype-definitions-from-a-drawing.&highlight=custom+linetypes Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.