jamildear4u Posted July 11, 2013 Share Posted July 11, 2013 Dear all, can any one tell me how to stretch the circular object or body in the polar direction for example draw the round bar 3/4 for the circle (270 Deg.) and draw the 10 hole equally spaced on it. how can i stretch or extend round bar upto full circle (360 deg.) and holes on the round bar also stretch 10 equally spaced. Jamil Quote Link to comment Share on other sites More sharing options...
Dadgad Posted July 11, 2013 Share Posted July 11, 2013 Welcome to CADTutor. Try using a POLAR ARRAY, and constrain the number of holes, rather than the spacing of the holes. Quote Link to comment Share on other sites More sharing options...
neophoible Posted July 12, 2013 Share Posted July 12, 2013 For increasing the length, try using the LENgthen command, which includes an Angle option. But note that ARCs cannot be full circle, that is, they must be less than 360 degrees, though they can be very, very close to 360. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.