bjenk8100 Posted July 24, 2014 Share Posted July 24, 2014 Wow, I am having some serious issues with this program. First, are there any symbols or anything representing elevations like newer versions or do you have to draw everything. Also, this is something i have experienced with newer versions as well. If you set up a layout and apply a plotter to that layout and apply that layout as the default for the plotter a lot of problems occur. I sometimes have a drawing at say "18x24". Sometimes I just want to print it on out regular 11x17 to save some paper and/or have a smaller size. I am not concerned about the scale changing. I want to go to page setup, and change it from 18x24 to 11x17. In doing so the blue circle just keeps on spinning around having serious issues. Same result if the plotter is not plugged in. Errr!!! So so so annoying. Please Help, Bjenks Quote Link to comment Share on other sites More sharing options...
nestly Posted July 24, 2014 Share Posted July 24, 2014 I used 2005 before updating to 2011, and I don't recall a significant difference in the number of symbols between 2005 and current. No dynamic blocks, but otherwise I think the symbols library in Design Center and Tool Palettes was similar. I'm also not sure I understand the plotting problem, but perhaps 2004 is having trouble with a plotter that's probably much newer? Quote Link to comment Share on other sites More sharing options...
RobDraw Posted July 24, 2014 Share Posted July 24, 2014 Oh, the woes of old software. Is this on a newer OS? Quote Link to comment Share on other sites More sharing options...
bjenk8100 Posted July 24, 2014 Author Share Posted July 24, 2014 If plotter is hooked to network it works fine. It cant always be hooked up to network for various administrative issues. Other devices need to use that cable when not in use. If I just hit page setup manager to change how I print the same thing happens. Nothing works right when plotter is not hooked up. My template is configured for the plotter. I think that is the problem. It is just retarded that I cant change which printer or page setup without it lagging out. As far as tools. I cant find anything except for the basic drawing and modifying and and annotation is limited to dims and text. I dont even see mleaders anywhere. Just quick leader. Quote Link to comment Share on other sites More sharing options...
RobDraw Posted July 24, 2014 Share Posted July 24, 2014 Focus, tackle one problem at a time. Quote Link to comment Share on other sites More sharing options...
bjenk8100 Posted July 24, 2014 Author Share Posted July 24, 2014 I should bring my laptop. Quote Link to comment Share on other sites More sharing options...
BIGAL Posted July 25, 2014 Share Posted July 25, 2014 When you look at how old 2004 and I take it it is a budget thing, maybe consider purchasing one of the Autocad clones these will at least approach say 2013 version. Quote Link to comment Share on other sites More sharing options...
RobDraw Posted July 25, 2014 Share Posted July 25, 2014 There are some veteran users and old threads here that can help you out. If you pick one issue at a time, we can get you up to speed to the old days. Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 25, 2014 Share Posted July 25, 2014 I recently removed 2004 from my home CAD computer but I could reload it to help answer questions if you'd like. Quote Link to comment Share on other sites More sharing options...
bjenk8100 Posted July 25, 2014 Author Share Posted July 25, 2014 Well I am getting better at it. Right now my main issue is this. If I have snap and polar tracking on I am still running into an issue that I cant figure out. On my pc I can hit line and snap to something. Before clicking to generate a line I sometimes like to drag straight up or down and you can see a trail showing that you are in line with the point below and then hit mouse to generate the line knowing you are in line with the point below. I have gone through tools>options and went through everything. Is this option not available. I thought it was polar tracking. Alls that is doing is allowing me to hit certain angles after initializing the line. I want it initialized before I hit the line if this makes any sense to anyone. Quote Link to comment Share on other sites More sharing options...
nestly Posted July 25, 2014 Share Posted July 25, 2014 That sounds like Object Snap Tracking.... make sure OTRACK is enabled on the the status bar Quote Link to comment Share on other sites More sharing options...
bjenk8100 Posted July 25, 2014 Author Share Posted July 25, 2014 Ive done that. Otrack only works after initializing line start point. I like seeing it after hitting line but before initializing start point. For instance, say I draw a straight horizontal line. Then I hit line command, go to end of line i already drew and scroll over endpoint. I use to then go straight above and the dotted line would follow my cursor. Then I could hit starting point of my next line knowing it was directly above endpoint of my first line. This possible in 2004/05 Quote Link to comment Share on other sites More sharing options...
nestly Posted July 25, 2014 Share Posted July 25, 2014 Technically, I believe it's AutoTrack that you are having trouble with, after you pick the line's start point/basepoint, then it's Polar Tracking. (The two are not exclusive, they can be used simultaneously) Here's a demo with 2005, and I don't think there should be any significant differences. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.