XNY Posted February 3, 2015 Share Posted February 3, 2015 (edited) Hello folks! I have a wierd problem with Refedir command. After typing REFEDIT it doesnt prompt selection as usual, it asks for some input next cursor as on attached image. It does the same with preselection. I tried to enter name of the block but it also didn`t work. Any ideas what it possible wants? Note: In the DOC window opening each time for a half of second after exiting the commant I was able to read this line: command is not recognized as an internal or external autocad Edited February 3, 2015 by XNY Quote Link to comment Share on other sites More sharing options...
Dana W Posted February 3, 2015 Share Posted February 3, 2015 Hit your f2 key to expand the command line to a text window. Then you can see if there are any other messages in the response you are getting from the refedit command. Are your xref layers locked, or otherwise restricted by any chance? Quote Link to comment Share on other sites More sharing options...
XNY Posted February 3, 2015 Author Share Posted February 3, 2015 Dear Dana, I found out the problem is system related. After reseting AutoCad to defaults the problem solved. http://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-reset-AutoCAD-to-defaults.html Thank you for help anyway Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.