Frannym Posted February 16, 2015 Share Posted February 16, 2015 Hi All, I have a filing cabinet that is 1000mm and I need to change it to 800mm. No idea how to do this. Be really grateful for any info you can give me. Big thanks Franny Quote Link to comment Share on other sites More sharing options...
Gotrekk Posted February 16, 2015 Share Posted February 16, 2015 Hi there, what about selecting it and scaling it to 0.8 ? Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 16, 2015 Share Posted February 16, 2015 Or if only one dimension is being changed (length or width) use the STRETCH command. Quote Link to comment Share on other sites More sharing options...
BIGAL Posted February 17, 2015 Share Posted February 17, 2015 Select the two lines that make corner press F3 snap off make sure ortho on F8 drag via mouse red dot in direction required smaller or bigger ok enter 200 corner will move, repeat lower corner. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.