gbradley Posted August 7, 2015 Share Posted August 7, 2015 Is there a simple way to put a Hole in using something similar to the Placement "From Hole"? I tried to use Linear, but I don't have a straight edge, and when I select the center hole it automatically switches to Concentric. The way I end up doing it is sketching a circle and extruding it through, or placing a point and putting the hole on the point. Either way I have to create a sketch. Quote Link to comment Share on other sites More sharing options...
MarkFlayler Posted August 9, 2015 Share Posted August 9, 2015 Sketch on the face first and then use a point dimensioned to the location you want. Then when you start the Hold command it will allow you to use the From Sketch option. Quote Link to comment Share on other sites More sharing options...
Lazer Posted August 16, 2015 Share Posted August 16, 2015 I'm quite an old school fan of placing holes with sketch points and never really used the hole placement tool if thou it has been around many years now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.