sketch

I drowed a sketch, 1 spline (curved) 3 lines, extruded it, an how I can change the points of spline from sketch with canges for solid form directly?

thanks

Edit the sketch.

There is an example in this tutorial

http://home.pct.edu/~jmather/content/DSG322/Inventor%20Tutorials/Inventor%202011%20Tutorial%2014.pdf

and this one

http://home.pct.edu/~jmather/content/DSG322/Inventor%20Tutorials/Inventor%2011%20Tutorial%206.pdf

the problem was that in Inventor Fusion, I edited the cketch but the solid does not apply transformations, Now with inventor professional it works... Is it true that all what I do in Autocad Architecture i can do with Inventor? always ai attache a jpg i draw lines and polylines on image, extrude them , subtract, union , ant some parameters... where to find ploting settings, plot scale, style - for export to pdf, or jpg 3d hidden,lines... ?

Inventor Fusion very different from Inventor.

In Inventor a part is an ipt file, an assembly is an iam file and a drawing is an idw or dwg file (similar to the real world).

Go through the built in Help>Learning Tools>Tutorials and Skillbuilders.

ok, thanks