BEKA Posted February 11, 2005 Share Posted February 11, 2005 Hi all, I have problem inserting Excel file to Cad. After I insert a file from Excel to Cad, I am not getting the hole page. 9 columns I can get to my Cad file only . What I should do to solve this problem ? Please if anyone can help. thanks Quote Link to comment Share on other sites More sharing options...
Guest marcus Posted February 16, 2005 Share Posted February 16, 2005 I have had the same problem.. there is alimit to how big the fiel can be. At least in 2000i this is what the help file says: Issue You paste a Microsoft Excel spreadsheet into AutoCAD, however, the spreadsheet is truncated. Solution When an Excel spreadsheet is pasted into AutoCAD, only the Picture (metafile) format is used, which can result in the spreadsheet being truncated. This normally occurs when the column width and row height in Excel are set to the default (default width is 8.43, and default height is 12.75), and the pasted object exceeds 18 columns and 70 rows. Use one or both of these methods to resolve the problem: Method #1 In Excel, reduce the column width and row height. You can paste more of the spreadsheet if you reduce the column width and row height. Method #2 Paste the spreadsheet in separate parts. By pasting the spreadsheet in separate parts you can break it down into several smaller OLE objects. Quote Link to comment Share on other sites More sharing options...
BEKA Posted February 16, 2005 Author Share Posted February 16, 2005 Thank you Marcus, Quote Link to comment Share on other sites More sharing options...
Guest marcus Posted February 16, 2005 Share Posted February 16, 2005 NO PROBLEM. Quote Link to comment Share on other sites More sharing options...
erona Posted February 17, 2005 Share Posted February 17, 2005 Try this... http://www.jefferypsanders.com/autolisp_XL.html Quote Link to comment Share on other sites More sharing options...
BEKA Posted February 17, 2005 Author Share Posted February 17, 2005 Thank you Erona, Quote Link to comment Share on other sites More sharing options...
Guest jorlwebb Posted February 21, 2005 Share Posted February 21, 2005 Aww, I was gonna guess that solution. I don't know CAD, yet, but I'm familiar with Excel and how it plays with others (i.e., that's typical Excel) Hah, but I'm too late. Quote Link to comment Share on other sites More sharing options...
otil Posted January 9, 2010 Share Posted January 9, 2010 HI erona, seems your filipino, your good in autocadd Quote Link to comment Share on other sites More sharing options...
ReMark Posted January 9, 2010 Share Posted January 9, 2010 What version of AutoCAD are you using? In the past inserting an OLE object was about all one could do without resorting to third-party software. With newer releases of AutoCAD (2008 and higher) one can use DataLinking. Note: the large the Excel file size the more difficult it becomes to do this successfully. Nine columns (how many rows?) doesn't sound unreasonable. Quote Link to comment Share on other sites More sharing options...
otil Posted January 9, 2010 Share Posted January 9, 2010 Try this... http://www.jefferypsanders.com/autolisp_XL.html Im planning to go on vacation in philippines, where we can have a crash course for that Cinema4D and vector, Im also a Filipino! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.