CHRISMYERS5 Posted July 14, 2009 Share Posted July 14, 2009 Is there any way to globally change text height across a drawing that has many blocks with attributed test. I can do them individually with no problems, but when the drawing has 200 blocks it is time consuming. I am using AutoCAD 2008 Quote Link to comment Share on other sites More sharing options...
StevenMc Posted July 14, 2009 Share Posted July 14, 2009 you could try one of Lee Mac's LISP files. theres one for multiple attribute editing... http://www.cadtutor.net/forum/showthread.php?t=37859 Quote Link to comment Share on other sites More sharing options...
Ryder76 Posted July 14, 2009 Share Posted July 14, 2009 You can't do it using BATTMAN and ATTSYNC ? Quote Link to comment Share on other sites More sharing options...
nocturne00 Posted July 14, 2009 Share Posted July 14, 2009 This is assuming these 200 blocks are all from one block definition. if its 200 different blocks you may have to look into scripts to get it done. Quote Link to comment Share on other sites More sharing options...
CHRISMYERS5 Posted July 14, 2009 Author Share Posted July 14, 2009 All of the blocks I am trying to edit are not from the same block definition. The drawings were provided to me as is...not the way I would of done it. Quote Link to comment Share on other sites More sharing options...
Ryder76 Posted July 14, 2009 Share Posted July 14, 2009 Then nocturne is right you will need a lisp. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.