Any sources for 3D EMT conduit fittings?

[SuperCAD]

I've been searching like a mad man for conduit fittings and I can't find anything compatible with AutoCAD, and very few for other programs like Solidworks.

 

Is there a corner of the net I can go to get drawings of conduit fittings, or is anyone who may have them willing to share?

 

I badly need a 1/2" EMT pulling elbow for a project I'm working on.

[ReMark]

Did you pay a visit to the CAD Block Exchange Network? Lots of content just wish it was better organized.

[SuperCAD]

I would like to get 3D stuff, but 2D will suffice. I can make my own 3D blocks from it.

 

No, I haven't looked there, but I'll go check it out now.

[ReMark]

In my searches of last night I wasn't able to even find any 2D conduit fittings. I tried GlobalSpec and ThomasNet.

[SuperCAD]

I couldn't find anything on the site you pointed me to either. I'm just going to have to break out the calipers and radius gauges, buy a couple of fittings and model them myself.

[ReMark]

Sorry to hear you had no luck.

 

"...buy a couple of fittings and model them myself."

 

That's one surefire solution.

 

Now I know who to ask when I need one too.

[SuperCAD]

Not my best work, but a quick and dirty of the fittings I needed.

[deres]

This might help:

http://www.boltproducts.com/index.php

[SuperCAD]

I checked that site yesterday and couldn't find much of anything related to EMT conduit.

[deres]

You are right...I just searched the site.

Anyway, good luck. If I find somethig I'll let you know.

[SuperCAD]

Sweet, thanks!

[SuperCAD]

Here's a 90 degree pull elbow I just modeled. It's for 3/4" EMT conduit. Still have to add the screws though.

[Rick Willits]

http://www.tnb.com/ps/reg/reg.cgi?ca=corp&action=login&referer=/ps/fulltilt/index.cgi?part=5223 thre years late

[tzframpton]

http://www.tnb.com/ps/reg/reg.cgi?ca=corp&action=login&referer=/ps/fulltilt/index.cgi?part=5223 thre years late

AutoCAD MEP has all these fittings, not to mention all the routing tools for conduit anyway.