Glen Smith Posted October 16, 2009 Posted October 16, 2009 Has anyone had issues with Desgin Review 2010? I have a 98 page project (each page on its own DWG file) that has been published to DWF with AtuoCAD Electrical 2010. I tried printing it to PDF using the CutePDF driver in Design Review 2010 yesterday afternoon. Approximately 2 hours later it "finished" and produced a PDF file with 4 pages in it. This is not the first time this has happened. I opened the same DWF file on another computer in the office with Design Review 2008 and printed with the CutePDF driver. In less than 10 minutes I had a complete PDF file. SO I was going to post and ask questions but I knew that someone (ReMark probably) would ask what each one of the computer specs were and so on. So I uninstalled DR2010 on my machine and installed DR2008. With the same DWF & CutePDF driver (this time I timed it) in 5 mins 37 secs I had a complete 98 page PDF. My machine is a DELL 4600 Pentium 4 3.00 GHz with 3 G of ram running XP Pro SP3 The other machine is the same but only has 1.5G of ram. Any thoughts? Quote
Glen Smith Posted October 21, 2009 Author Posted October 21, 2009 So either this means that nobody is having problems with DR 2010, noboby is using DR2010 or nobody is reading my posts. Does anyone have any feedback on DR2010? Glen Quote
chelsea1307 Posted October 21, 2009 Posted October 21, 2009 I read your post, but dont use design review, hope you get it sorted out Quote
SuperCAD Posted October 22, 2009 Posted October 22, 2009 http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=13420117&linkID=9338137 There is a patch that fixed the PDF large print spooling sizes. I was having the same problem until I applied the patch. Works like a charm now. Quote
Noahma Posted October 22, 2009 Posted October 22, 2009 So either this means that nobody is having problems with DR 2010, noboby is using DR2010 or nobody is reading my posts. Does anyone have any feedback on DR2010? Glen I have the same problems printing from a DWF to PDF through DR2010 Quote
Glen Smith Posted October 27, 2009 Author Posted October 27, 2009 Well I applied the hotfix and while it improved the problem, it did not resolve it. My 98 page DWF printing to PDF will produce 37 pages in 40 minutes. I'm going back to DR2008. Glen Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.