MAK Posted April 1, 2010 Posted April 1, 2010 Hello again: My saga with this program continues. Things were going OK on this project with the deadline approaching on Friday, it's going to be tight. 3 drawings open, doing some final cleanup and decided I needed to stretch a base plate 1/2". Click stretch icon, left window the end, enter 1/2" and move mouse in the correct direction. (ortho on) Crap, it stretches on a 52,489.9289" diagonal at 131.0966 degrees. I tried a few other areas with very similar (but not exactly the same) results, always a diagonal in the 52,000 or so inches. I closed the program, loaded a new drawing to modify, clicked world ucs icon, tried a different mouse, but the problem persists. At this point I'm not sure if it's the program or the computer. Any help is greatly appreciated. Quote
MAK Posted April 1, 2010 Author Posted April 1, 2010 OK, I figured it out. Num Lock key was on, or off?. Not sure what that's all about but it works now. Sigh. Time for sleep. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.