roberj2 Posted September 21, 2008 Posted September 21, 2008 Hello, I am currently running Autodesk Land Development 2005. I am trying to cut a profile from existing grade off a pipe alignment. My alignment is based off a proposed mile long pipe line and I have sampled 50 ft off the center line of the alignment. I've made my alignment and cut my profile several times. I am trying to cut it to Horizontal 1"=50' and vertical 1"=5'. However, every time I cut my profile it seems my vertical scale is not right. I use to know how to do this but I have been away from Civil CAD for several years now. My question: Is there some type of setting or something that I am not using to make my vertical scale correct? Any help would be greatly appreciated. Thanks! Quote
rustysilo Posted September 22, 2008 Posted September 22, 2008 What are your drawing settings at for scale? Quote
BOB'27T Posted September 22, 2008 Posted September 22, 2008 Have you checked the grid properties for the vertical exaggeration? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.