Jump to content
brasax

Deleting duplicate lines, arcs, hatches, etc... on 2011

Recommended Posts

brasax

I've read the posts about the "overkill" command which doesn't work on 2011 anymore. :?

 

Any other command I don't know about that would take care of overlapping lines, etc.. ? It seems if Autodesk already had a command for this issue, it should still have it...or?

 

The posts list that "overkill" is an Express Tool. If it's just a matter of having Express Tools, then I would be very happy if somebody could explain me how to get those. I don't seem to have them, yet a lot of the commands are there - seems to me as if ET got mixed in with the rest of AutoCAD and is not a separate command center anymore.

 

Thanks!

Share this post


Link to post
Share on other sites
nestly

Express Tools must be installed to use Overkill, that's true of all versions, not just 2011. To install Express Tools, just re-run the setup from your AutoCAD CD, or from the Control Panel. (see below)

 

ExpressTools.jpg

Edited by nestly

Share this post


Link to post
Share on other sites
ReMark

Just curious. If you type CUILOAD and hit the Enter key does Express show up in the loaded customizations group list?

Share this post


Link to post
Share on other sites
brasax

Everything worked fine: CUILOAD showed me that ETs were not loaded, and loading them per the instructions above worked perfectly.

 

"Overkill" really is a godsend for my current project, so thank you all for your help! :)

Share this post


Link to post
Share on other sites
ReMark

nestly nailed so the credit belongs rightfully to him.

 

We're glad to hear you got your problem solved. Thanks for updating us.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...