jamesjh Posted March 5, 2011 Posted March 5, 2011 Hi The clue is in the question! I want to create a 3D bottle top / bowl type object. I can draw the cross section through it (2D), but would love to know to turn that into a 3D bowl. Thankyou. Quote
Jack_O'neill Posted March 5, 2011 Posted March 5, 2011 Check the help files for the "revolve" command. Or...if your bowl isn't exactly round, investigate the "sweep" command. Quote
JD Mather Posted March 5, 2011 Posted March 5, 2011 I can draw the cross section through it (2D) Attach the file here if you can't figure it out. Quote
ReMark Posted March 6, 2011 Posted March 6, 2011 Don't attach your file until you have given it your best shot. There are probably three or four ways (a couple are similar but use different commands) to accomplish the task. Also take a look at similar threads to see what other people have done. I know that the 3D bottle question has come up a few times. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.