clicker Posted April 8, 2011 Posted April 8, 2011 I'm inserting an xref, and its coming in at a weird scale.... I noticed that in the 'external reference' dialog box the 'block unit' scale factor is set to a weird scale (.0394), but it will not let me edit it. Has anyone come across this and know how I can fix it? clicker Quote
rkent Posted April 8, 2011 Posted April 8, 2011 Can you change it from properties? The scale factor is for a metric drawing so you can scale by 25.4 to get the size desired (1/25.4 = 0.393701). I don't see a scale factor in my xref dialog boxes. Quote
dbroada Posted April 8, 2011 Posted April 8, 2011 can't help with the why but the scale factor is inches -> mm so I would check the units in both drawings first. Quote
clicker Posted April 8, 2011 Author Posted April 8, 2011 can't help with the why but the scale factor is inches -> mm so I would check the units in both drawings first. yes you are correct. Thanks. Quote
Oh No! Posted December 28, 2011 Posted December 28, 2011 THANK YOU!!! This was driving me nuts! Quote
Bloop Posted September 14, 2012 Posted September 14, 2012 This drove me nuts for a while too. At the command line, type "INSUNITS" and set it to 1. This will solve the problem. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.