tennis4you Posted June 11, 2011 Share Posted June 11, 2011 I have a stubborn area that will not hatch. I have looked at all the boundary lines/areas and everything seems to be OK. I assume I am missing a true connection somewhere but I cannot find it. What options do I have in this instance? In MicroStation I was able to set a "Max Gap" (say to something like 1/4") and it will just assume that any gap less than 1/4" did not existing and it would hatch the area. Do I have an option like that in AutoCAD? Thanks! Quote Link to comment Share on other sites More sharing options...
kencaz Posted June 11, 2011 Share Posted June 11, 2011 I am sure LT has Gap Tol... KC Quote Link to comment Share on other sites More sharing options...
BIGAL Posted June 15, 2011 Share Posted June 15, 2011 As I mentioned to same question posted a few days ago hatch often does this its a Autocad mystery add a cross line say at middle but to two ends/ints then hatch twice remove cross line often works. Also can you see object fully on screen. Recreate a enclosing polyline using a different start line pick via object rather than centre pt. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.