mugshot Posted September 28, 2011 Share Posted September 28, 2011 good day to all of you... got a little problem here and asking a little bit of a help... 1. is there a faster way or command to which lines are flying??? coz i got this file from a collegue and i was wondering why is it that lines doesnt connide each other... so when i tilt the file into front elevation... i saw all the lines were not on the same elevation.. so what i did is to change the value of Z into zero.... 2. does i press something... i used to select the object, pan and drag ( to select and add more on my selected objects.)... now if i select the object and use the center of my mouse to drag... point were gone out... so i input first the command then select and drag.. whew!.. i had search the whole help but i cant find the proper answer... thank you in advance and kind regards.... Quote Link to comment Share on other sites More sharing options...
Organic Posted September 28, 2011 Share Posted September 28, 2011 1. is there a faster way or command to which lines are flying??? coz i got this file from a collegue and i was wondering why is it that lines doesnt connide each other... so when i tilt the file into front elevation... i saw all the lines were not on the same elevation.. so what i did is to change the value of Z into zero.... FLATTEN possibly? Although if I had to do it I'd do QSELECT and set the z values to 0 also. 2. does i press something... i used to select the object, pan and drag ( to select and add more on my selected objects.)... now if i select the object and use the center of my mouse to drag... point were gone out... so i input first the command then select and drag.. whew!.. i had search the whole help but i cant find the proper answer... thank you in advance and kind regards.... Is PICKFIRST set to 1? Quote Link to comment Share on other sites More sharing options...
mihael_b Posted September 28, 2011 Share Posted September 28, 2011 in addition to the last post, lisp for the same action: http://acaduser.com/forum/viewtopic.php?id=19 Quote Link to comment Share on other sites More sharing options...
SLW210 Posted September 28, 2011 Share Posted September 28, 2011 Creat a button with this macro: ^C^C_UCS;;_move _all;;0,0,1e99;;_move _all;;0,0,-1e99;;_chprop;_all;;_thickness;0;;^M; Quote Link to comment Share on other sites More sharing options...
mugshot Posted October 5, 2011 Author Share Posted October 5, 2011 thanks 4 d reply.,. Yes, it is set to 1... Quote Link to comment Share on other sites More sharing options...
mugshot Posted October 5, 2011 Author Share Posted October 5, 2011 ... Flatten helps... Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.