dwillmschen Posted February 7, 2012 Share Posted February 7, 2012 does anyone know if it is possible to use a user defined parameter to drive a action parameter. I have several polar and linear stretch actions i would like to drive from one parameter. i think i have attached my dwg. the block name is config1 FOAM_DRAIN_PAN_DYN_BLOCK.dwg Quote Link to comment Share on other sites More sharing options...
irneb Posted February 8, 2012 Share Posted February 8, 2012 You can use a Lookup parameter. See the attached. Lookup DB.dwg Quote Link to comment Share on other sites More sharing options...
dwillmschen Posted February 8, 2012 Author Share Posted February 8, 2012 I don’t think a lookup parameter will work the drain pan size could be anything from 44" to 600" there would be to many combinations to use a look up parameter Quote Link to comment Share on other sites More sharing options...
Grant Posted February 8, 2012 Share Posted February 8, 2012 The only other thing you can do is to do some visual lisp as you can change values in the list of the dynamic block. Type list enter All the values there you should be able to get to. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.