darris07 Posted October 27, 2008 Share Posted October 27, 2008 my professor insists that i set drawing limits and center my drawing within the limits. he never quite explained how to do this and he wants me to find out on my own. how can this be done? Quote Link to comment Share on other sites More sharing options...
hotrodz0321 Posted October 27, 2008 Share Posted October 27, 2008 what are you drawing and what are your drawing limits? are you able to find the center of your limits? you could draw a line from your min to your max limits and the center would be the midpoint of that line. depending on what you are drawing, find the center of your drawing and move it to the center of the limits you found earlier..... Quote Link to comment Share on other sites More sharing options...
lpseifert Posted October 27, 2008 Share Posted October 27, 2008 Turn Grid on. it shows the limits or type Limmin, it will return LL corner of Limits Limmax will return UR corner Draw a line from LL to UR, center your drawing at the midpoint p.s. this will probably be the last time you ever use limits. Quote Link to comment Share on other sites More sharing options...
darris07 Posted October 27, 2008 Author Share Posted October 27, 2008 thanks. i hope it is Quote Link to comment Share on other sites More sharing options...
darris07 Posted October 29, 2008 Author Share Posted October 29, 2008 im drawing a set of floor plans and some elevations. he wants the floor plans centered in the left half of the drawings limits and the elevations in the right Quote Link to comment Share on other sites More sharing options...
hotrodz0321 Posted October 29, 2008 Share Posted October 29, 2008 draw a line dividing your limits in half.....move the floor plans to the middle of the side you want....do the same for the elevations Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.