stenews Posted April 21, 2012 Share Posted April 21, 2012 Hi guys, have you never tried to print a viewbase layout with a large scale factor? The problem I'm having with ac2013 is that the print is coming out with jagged edge. Why? How can avoid that? Thanks, Stefano. Quote Link to comment Share on other sites More sharing options...
ReMark Posted April 21, 2012 Share Posted April 21, 2012 What kind of scale factors are we talking here? I've used the VIEWBASE command a handful of times and have not encountered a problem however my scale factors are usually in the range of 1/2", 3/4", 1" or 1 1/2" equals a foot. In rare instances I might use 3"=1'. Quote Link to comment Share on other sites More sharing options...
stenews Posted April 21, 2012 Author Share Posted April 21, 2012 Hi ReMark, thanks for your reply! You're right, I suppose that It happens when I try to customise the scale, using one different than the standard ones Is it reasonable for your point of view thanks again! Quote Link to comment Share on other sites More sharing options...
ReMark Posted April 21, 2012 Share Posted April 21, 2012 Actually, that wasn't my point. I think you could use non-standard scales and still expect to obtain a good quality print. What scales have you been using? Quote Link to comment Share on other sites More sharing options...
stenews Posted April 22, 2012 Author Share Posted April 22, 2012 Hi ReMark, sorry for my late but I had no mail notification to your last message. BTW I'm still having poor quality print with any scales I choose. I'm in trouble with the edge of the rounded shape... Quote Link to comment Share on other sites More sharing options...
ReMark Posted April 22, 2012 Share Posted April 22, 2012 Either post a copy of the drawing or tell us what non-standard scales you are using. Quote Link to comment Share on other sites More sharing options...
stenews Posted April 22, 2012 Author Share Posted April 22, 2012 Hi ReMark see if you can understand the reason of the jagged edges I attached a scanned images of my viewbase print out Quote Link to comment Share on other sites More sharing options...
ReMark Posted April 22, 2012 Share Posted April 22, 2012 I cannot discern the cause of the jagged edges based on an image and since you have not attached a copy of the DWG file nor answered my question (which I asked three times) re: the scales you are using I feel that I can no longer assist in this matter. Perhaps someone else can help you. I hope you find a solution. Quote Link to comment Share on other sites More sharing options...
stenews Posted April 22, 2012 Author Share Posted April 22, 2012 any scale 1:20 1:50 any one it does not matter always the same Quote Link to comment Share on other sites More sharing options...
stenews Posted April 22, 2012 Author Share Posted April 22, 2012 may be it's only my print cartridge ..that is nearly empty make it sense? Quote Link to comment Share on other sites More sharing options...
stenews Posted April 22, 2012 Author Share Posted April 22, 2012 the dwg file is too big the forum does not give to me the way to upload it If you want I can attach you to your e-mail let me know Quote Link to comment Share on other sites More sharing options...
stenews Posted April 25, 2012 Author Share Posted April 25, 2012 Hi ReMark, I should formally apologize with you for our last discussion thread. I'm really stack with this new viewbase ac2013 command and last days I had problem with both my ADSL connection and my web browser. I couldn't send you a dwg file but I'd like to do that. My manage attached interface seems to not let me send a so large file (I suppose). let me know if how can I do that, Bye, Stefano. I couldn't send you a private message because you slot is full Quote Link to comment Share on other sites More sharing options...
ReMark Posted April 25, 2012 Share Posted April 25, 2012 Stefano: You do not owe me an apology nor an explanation. ReMark Quote Link to comment Share on other sites More sharing options...
Strix Posted April 25, 2012 Share Posted April 25, 2012 If I'd had this reply to one of my posts, I too would believe I had done or said something which warranted an apology ReMark Does this mean you're happy to receive his email? Quote Link to comment Share on other sites More sharing options...
ReMark Posted April 25, 2012 Share Posted April 25, 2012 I've never intentionally blocked anyone's private message, visitor message or email to me and do not intend to start now. Any member of this forum is free to contact me in any manner they choose even if we've had our disagreements in the past. Quote Link to comment Share on other sites More sharing options...
Strix Posted April 25, 2012 Share Posted April 25, 2012 Oh good I'll merge this with the original then, so anybody who is following this thread knows where all the info is Quote Link to comment Share on other sites More sharing options...
stenews Posted April 25, 2012 Author Share Posted April 25, 2012 okay, I'm more than happy that everything is right! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.