frazer Posted May 23, 2012 Share Posted May 23, 2012 Morning All I have done this a thousand times before, but i have had a break from this sort of thing and i am quickly becoming frustrated not sure if it is me or my computer and installation is playing up, i am trying to create a part which i have done simply with a series of extruded squares and circles and then creating a block out of it all, this is for setting out purposes and needs only to be crude in design, i have done this in autocad profile, when i switch to MEP profile try to convert this to a part using the content builder i either result in no display or an odd line or two (the attached i quickly knocked up this morning and i see nothing after generating, can anyone help me out where i might be going wrong. File attached, any help greatly appreciated. Just to confirm this part was all made on layer 0, which from memory is important, the part is a boiler type condensing and in content builder i select it as such, i am using the MEP UK profile to create part. Boiler Layout.dwg Quote Link to comment Share on other sites More sharing options...
hoss Posted May 23, 2012 Share Posted May 23, 2012 have a look at this thread http://www.cadtutor.net/forum/showthread.php?68100-Content-Builder-question!! it might help Quote Link to comment Share on other sites More sharing options...
frazer Posted May 28, 2012 Author Share Posted May 28, 2012 Thanks Hoss Moving the model to 0,0,0 solved the problem. I remember now having referred to the link I had actually read this post some time ago, thanks again for your input Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.