Salama Posted May 24, 2012 Posted May 24, 2012 Hi every body , the lisp named CAR is a lisp routine to calculate the area of any entire polygon drawn in AUTOCAD. How to use : 1- Run the Autocad. 2-Load application named "car" or directly drag it into the autocad. 3- the command for the lisp is " car " enter 4- select the polygon u want to know its area. CAR.LSP Quote
Salama Posted May 24, 2012 Author Posted May 24, 2012 welcome Mr . pBe . sharing is awesome and puts us all on the road . i still have some more 15 lisps + excel files that used to draw vertical curve, road profile , or even cross section via some lisps too . Godwelling , shall share the files and related lisps in this order : 1- draw road profile xls + lisp = copy from excel and paste in autocad to get a profile . 2- draw vertical curve xls + lisp 3- get road cross section levels in excel + lisp & draw in autocad Quote
Dadgad Posted May 25, 2012 Posted May 25, 2012 Welcome to the forum Salama. Not required, but it is always nice to bring a little something to the party! Thanks. Quote
shingir Posted November 7, 2013 Posted November 7, 2013 SaLmA and at the same time I think you are not SALMA (in the right way) .... Just you are here to show that you know, please be your self Quote
Organic Posted November 7, 2013 Posted November 7, 2013 SaLmA and at the same time I think you are not SALMA (in the right way) ....Just you are here to show that you know, please be your self What are you talking about? Quote
ReMark Posted November 7, 2013 Posted November 7, 2013 Maybe shingir has his SaLma's mixed up. Could he be referring to Salma Hayek? Salma Hayek Jiménez is a Lebanese and Mexican American film actress, director and producer. Quote
shingir Posted November 7, 2013 Posted November 7, 2013 Maybe shingir has his SaLma's mixed up. Could he be referring to Salma Hayek? Salma Hayek Jiménez is a Lebanese and Mexican American film actress, director and producer. No dear, I mean it, no need to publish others work under her name Quote
shingir Posted November 7, 2013 Posted November 7, 2013 Did you contact the person who make the excel sheet for profile before you publish it?This is what I'm speaking about Quote
ReMark Posted November 7, 2013 Posted November 7, 2013 shingir: Are you saying that the lisp routine attached to post #1 was authored by someone else? To my knowledge no one has posted an Excel spreadsheet nor a lisp routine that creates one. Salma never returned with the promised lisp routines mentioned in post #3 dated May of 2012 so what is the problem here? Quote
shingir Posted November 7, 2013 Posted November 7, 2013 What are you talking about? Did you contact the person who make the excel sheet for profile before you publish it?This is what I'm speaking about Quote
ReMark Posted November 7, 2013 Posted November 7, 2013 Who or what is the source of these lisps routines that you are trying to protect? Quote
MSasu Posted November 7, 2013 Posted November 7, 2013 I believe Shingir is talking about this thread. Quote
shingir Posted November 7, 2013 Posted November 7, 2013 shingir: Are you saying that the lisp routine attached to post #1 was authored by someone else? To my knowledge no one has posted an Excel spreadsheet nor a lisp routine that creates one. Salma never returned with the promised lisp routines mentioned in post #3 dated May of 2012 so what is the problem here? O.K What is about this http://www.cadtutor.net/forum/showthread.php?69698-Create-and-Draw-Road-Profile-with-Excel-and-Lisp&p=477030#post477030 Quote
shingir Posted November 7, 2013 Posted November 7, 2013 I believe Shingir is talking about this thread. yes, you are the one Quote
ReMark Posted November 7, 2013 Posted November 7, 2013 Dratz! OK...I see what is being referred to. Not sure why shingir just didn't keep his comments confined to the actual thread where the infraction occurred. Thanks MSasu. Quote
MSasu Posted November 7, 2013 Posted November 7, 2013 No problem, ReMark! It would be great if Shingir would provide us more details to sustain his/her allegations. Quote
ReMark Posted November 7, 2013 Posted November 7, 2013 No problem, ReMark! It would be great if Shingir would provide us more details to sustain his/her allegations. Yes, that would be nice but he seems reluctant. I'm all for giving credit where credit is due when it comes to the work of others be it a drawing, a spreadsheet or a lisp routine. I take a dim view, as I am sure many of us do, of someone passing off another's person's hard work as their own. Quote
SLW210 Posted November 7, 2013 Posted November 7, 2013 SaLmA and at the same time I think you are not SALMA (in the right way) ....Just you are here to show that you know, please be your self You need to provide some evidence that said work is not theirs or they don't have permission to post the work, otherwise stop spamming the forum with your comments. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.