Jump to content
gman1979

Surface Model Mapping

Recommended Posts

gman1979

Right, I’m racking my brain here and I’m finally giving in and looking for assistance from the collective knowledge on the forum. I am having some mapping difficulties with regards to applying a jpeg as a material map onto a surface material. Below are the details.

I have a surface model which was generated from topographical information.

I have aerial photography of the area the topographical information is based on.

The photography covers approximately 1000m2 area.

The topography area in contained within this area, it is in the upper right hand corner of the square photo.

I have applied planar mapping to the surface

I resized the mapping area of the surface to suit the area that the photo covers (I created a boundary rectangle and adjusted the mapping size to suit).

I created a customer material using the jpeg photo

I applied it to the surface

The image scale is set to 1000

All other settings remain as default settings.

The mapping displays over my model, but its on the wrong location, i.e. information contained within the jpeg that is out with the topographical area is appearing on the model. When I turn off tiling the mapping disappears from my model completely. I have read a few tutorials today and went back to basics on a few trials by creating blocks and applying the material and scaling it that way. All behave as anticipated. Apart from this.

Any help that could be given would be great.

Thanks in advance

G

AutoCAD 2011

Windows XP Professional.

Share this post


Link to post
Share on other sites
gman1979

Looks like i'm not the only one stumped!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...