byk3bep Posted July 8, 2013 Share Posted July 8, 2013 I'm sure there is a simple way to do this so here is the q.: I would like to place a planar object (drawn in custom ucs) in another plane that is defined by an object in it or a ucs plane (xy). The reason for this is that i have a lot of mline txt that i written in a single plane and would like to quickly rotate/place them in the correct place/plane. Hope that was clear. Thx for all your help and time Quote Link to comment Share on other sites More sharing options...
Dadgad Posted July 8, 2013 Share Posted July 8, 2013 If you copy it to your clipboard, then change your UCS, which could be defined any numer of ways, including 3 POINTS or OBJECT, then PASTE it into that new UCS, you should be good to go. Quote Link to comment Share on other sites More sharing options...
byk3bep Posted July 8, 2013 Author Share Posted July 8, 2013 (edited) For those irritating moments when u know there is a simple answer but you're never gonna find it ====> CADTutor forums Thx for making life easier Edited July 8, 2013 by byk3bep Quote Link to comment Share on other sites More sharing options...
Dadgad Posted July 8, 2013 Share Posted July 8, 2013 For those irritating moments when u when u know there is a simple answer but you're never gonna find it ====> CADTutor forums Thx for making life easier Here at CADTutor, we've got no problems, just solutions. Happy to be able to help. May all your problems be so easily remedied. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.