LFreels Posted December 9, 2014 Share Posted December 9, 2014 Hi, When I go to insert an xref in paperspace I set the insertion scale in the insert dialog box. No matter what scale I told it to be the drawing is as .0625 when I go look at the scale in the properties after I've inserted it. I can change the scale in the properties box and it changes the drawing. Any ideas? I've tried working with INSUNITS et al. but, they don't effect the problem. I'm working in AutoCad Mac 2014. Quote Link to comment Share on other sites More sharing options...
ReMark Posted December 10, 2014 Share Posted December 10, 2014 You might try setting the following and see what happens. INSUNITS=0 INSUNITSDEFSOURCE=0 INSUNITSDEFTARGET=0 Quote Link to comment Share on other sites More sharing options...
LFreels Posted December 10, 2014 Author Share Posted December 10, 2014 I did that and it didn't effect the problem, everything was still coming in at .0625 on inspection. Quote Link to comment Share on other sites More sharing options...
SLW210 Posted December 11, 2014 Share Posted December 11, 2014 Can you post both drawings? You might try using -DWGUNITS (use Hyphen in front) to setup the drawing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.