miroslav_s Posted January 16, 2016 Share Posted January 16, 2016 Hello, I want to use the path for my helix command but I don´t know how to do that. For example, in sweep command you have options for choosing path. Can I choose path in helix as well? If so, then how? See the link : http://prntscr.com/9qtgcn Thanks in advance. Best regards Quote Link to comment Share on other sites More sharing options...
Cad64 Posted January 17, 2016 Share Posted January 17, 2016 There is no option to choose a path that I am aware of. Command: HELIXNumber of turns = 3.0000 Twist=CCW Specify center point of base: Specify base radius or [Diameter] : Specify top radius or [Diameter] : Specify helix height or [Axis endpoint/Turns/turn Height/tWist] : This thread may be of interest: http://www.cadtutor.net/forum/showthread.php?353-Telephone-cord&highlight=telephone+cord Here's another one: http://www.cadtutor.net/forum/showthread.php?42900-half-round-spring&highlight=telephone+cord Quote Link to comment Share on other sites More sharing options...
miroslav_s Posted January 17, 2016 Author Share Posted January 17, 2016 Thank you Cad64. Will look into it. Best regards to you There is no option to choose a path that I am aware of. This thread may be of interest: http://www.cadtutor.net/forum/showthread.php?353-Telephone-cord&highlight=telephone+cord Here's another one: http://www.cadtutor.net/forum/showthread.php?42900-half-round-spring&highlight=telephone+cord Quote Link to comment Share on other sites More sharing options...
GP_ Posted January 22, 2016 Share Posted January 22, 2016 Hereabouts... Quote Link to comment Share on other sites More sharing options...
miroslav_s Posted January 23, 2016 Author Share Posted January 23, 2016 Hereabouts... Thank you GP_ Quote Link to comment Share on other sites More sharing options...
GP_ Posted January 24, 2016 Share Posted January 24, 2016 You're welcome Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.