hila Posted June 3, 2016 Share Posted June 3, 2016 HI all, I am having problems with the 2017 version, I used to use 2013, and now every new element i place, line, rectangle etc. it gives me the X/Y mark in a little box next to the element I drew, Its driving me crazy!! what do I have to switch off for it to stop????? Quote Link to comment Share on other sites More sharing options...
TheCADnoob Posted June 3, 2016 Share Posted June 3, 2016 are you talking about dynamic input? a screen shot might help. Quote Link to comment Share on other sites More sharing options...
ReMark Posted June 3, 2016 Share Posted June 3, 2016 You wouldn't happen to have Constraints enabled would you? Sorry, not at my CAD computer to verify at the moment. Quote Link to comment Share on other sites More sharing options...
hila Posted June 3, 2016 Author Share Posted June 3, 2016 this!! what is this??? Quote Link to comment Share on other sites More sharing options...
TheCADnoob Posted June 3, 2016 Share Posted June 3, 2016 As remark suggested those are constraints. The tools for handling those are in the parametric tab. if you dont have that you will have to show it by right click on it and selecting it from the list of avaliable tabs Once there you can show and hide etc or delete with the tools there. Quote Link to comment Share on other sites More sharing options...
ReMark Posted June 3, 2016 Share Posted June 3, 2016 I believe AutoCAD comes configured with constraints enabled as the default. You'll have to delete the ones you have first then disable the feature. Both actions are described in the AutoCAD Help file and have been discussed here in several similar threads. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.