Jump to content

Move from block to block to fill attributes?


MTE20112
 Share

Recommended Posts

I'm trying to see if this is possible. Drawing with many dynamic blocks, all with many attributes. Was curious if there was a routine that would select a single block - enable user to fill in the attributes click OK - then move onto the "next" block in the drawing until complete.

 

Anything like this remotely possible?

Link to comment
Share on other sites

You can get a selection of blocks by block name, go to the first or the one you picked and change the attributes, the order of selection is normally in creation order, you can skip the one you have already changed. Lee-mac has a dynamic block update program so would look at that first.

 

; get all blocks of the same name
(setq blk (entget (car (entsel "Pick a block"))))
(setq blkname (cdr (assoc 2 blk)))
(setq ss (ssget "X" (list (cons 0 "INsert")(cons 2 blkname))))
(alert (strcat "You have " (rtos (sslength ss) 2 0) " blocks called " blkname))

 

Without a sample dwg no more can be done post one with say 3 blocks

Link to comment
Share on other sites

CAD blocks2.dwg

You can get a selection of blocks by block name, go to the first or the one you picked and change the attributes, the order of selection is normally in creation order, you can skip the one you have already changed. Lee-mac has a dynamic block update program so would look at that first.

 

; get all blocks of the same name
(setq blk (entget (car (entsel "Pick a block"))))
(setq blkname (cdr (assoc 2 blk)))
(setq ss (ssget "X" (list (cons 0 "INsert")(cons 2 blkname))))
(alert (strcat "You have " (rtos (sslength ss) 2 0) " blocks called " blkname))

 

Without a sample dwg no more can be done post one with say 3 blocks

 

Here is a sample file - 3 blocks in the file, each has two attributes. How can I implement your code?

 

Thanks.

Link to comment
Share on other sites

I would probably just tweak them, if need be, in my QUICK PROPERTIES palette. CTRL+SHIFT+P to enable them, or turn them on in your task bar, at the bottom of the screen.

 

I suspect that Lee's lisp, to which BIGAL alludes, is the following http://www.lee-mac.com/dynamicblockcounter.html , which is very useful if you need to keep track of the conditions of multiple blocks easily.

 

Thanks Lee! :beer:

Block Attribute tweak from QP.jpg

Link to comment
Share on other sites

I was wondering on which of the forums to reply, and I've decided to post my attempt here:

[color=#8b4513]; Grrr[/color]
[color=#8b4513]; Upon selecting an attributed, dynamic block[/color]
[color=#8b4513]; user is prompted to change every attribute value, on every block with the same name, located on the current tab:[/color]
[b][color=BLACK]([/color][/b]defun C:test [b][color=FUCHSIA]([/color][/b] / *error* SysVarLst e enx o sUndo EffName SSX i en SSX-Lst BlksLst TempSS ll ur str b c att[b][color=FUCHSIA])[/color][/b]
[b][color=FUCHSIA]([/color][/b]setvar 'errno 0[b][color=FUCHSIA])[/color][/b] [b][color=FUCHSIA]([/color][/b]sssetfirst nil nil[b][color=FUCHSIA])[/color][/b]

[b][color=FUCHSIA]([/color][/b]defun *error* [b][color=NAVY]([/color][/b] msg [b][color=NAVY])[/color][/b]
	[b][color=NAVY]([/color][/b]sssetfirst nil nil[b][color=NAVY])[/color][/b]
	[b][color=NAVY]([/color][/b]if sUndo [b][color=MAROON]([/color][/b]vla-EndUndoMark [b][color=GREEN]([/color][/b]vla-get-ActiveDocument [b][color=BLUE]([/color][/b]vlax-get-acad-object[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b][b][color=NAVY])[/color][/b]
	[b][color=NAVY]([/color][/b]if c [b][color=MAROON]([/color][/b]vla-SendCommand [b][color=GREEN]([/color][/b]vla-get-ActiveDocument [b][color=BLUE]([/color][/b]vlax-get-acad-object[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b] [color=#2f4f4f]"_.undo"[/color][b][color=MAROON])[/color][/b][b][color=NAVY])[/color][/b][color=#8b4513]; if the user reached till this point[/color]
	[b][color=NAVY]([/color][/b]if SysVarLst [b][color=MAROON]([/color][/b]mapcar '[b][color=GREEN]([/color][/b]lambda [b][color=BLUE]([/color][/b] n v / [b][color=BLUE])[/color][/b] [b][color=BLUE]([/color][/b]setvar n v[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b] [b][color=GREEN]([/color][/b]mapcar 'car SysVarLst[b][color=GREEN])[/color][/b] [b][color=GREEN]([/color][/b]mapcar 'cadr SysVarLst[b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b][b][color=NAVY])[/color][/b]
	[b][color=NAVY]([/color][/b]if 
		[b][color=MAROON]([/color][/b]or 
			[b][color=GREEN]([/color][/b]not [b][color=BLUE]([/color][/b]member msg '[b][color=RED]([/color][/b][color=#2f4f4f]"Function cancelled"[/color] [color=#2f4f4f]"quit / exit abort"[/color][b][color=RED])[/color][/b][b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]wcmatch [b][color=BLUE]([/color][/b]strcase msg[b][color=BLUE])[/color][/b] [color=#2f4f4f]"*BREAK,*CANCEL*,*EXIT*"[/color][b][color=GREEN])[/color][/b]
		[b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b]princ [b][color=GREEN]([/color][/b]strcat [color=#2f4f4f]"\nError: "[/color] msg[b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b]
	[b][color=NAVY])[/color][/b]
	[b][color=NAVY]([/color][/b]princ[b][color=NAVY])[/color][/b]
[b][color=FUCHSIA])[/color][/b]

[b][color=FUCHSIA]([/color][/b]setq SysVarLst
	[b][color=NAVY]([/color][/b]mapcar [b][color=MAROON]([/color][/b]function [b][color=GREEN]([/color][/b]lambda [b][color=BLUE]([/color][/b] a b / [b][color=BLUE])[/color][/b] [b][color=BLUE]([/color][/b]list a [b][color=RED]([/color][/b]getvar a[b][color=RED])[/color][/b] b[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b]list [color=#2f4f4f]"CLIPROMPTLINES"[/color] [color=#2f4f4f]"CMDECHO"[/color] [color=#2f4f4f]"BLIPMODE"[/color] [color=#2f4f4f]"NOMUTT"[/color][b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b]list 3 0 0 0[b][color=MAROON])[/color][/b]
	[b][color=NAVY])[/color][/b]
[b][color=FUCHSIA])[/color][/b]

[b][color=FUCHSIA]([/color][/b]setq sUndo [b][color=NAVY]([/color][/b]vla-StartUndoMark [b][color=MAROON]([/color][/b]vla-get-ActiveDocument [b][color=GREEN]([/color][/b]vlax-get-acad-object[b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b][b][color=NAVY])[/color][/b][b][color=FUCHSIA])[/color][/b]
[b][color=FUCHSIA]([/color][/b]mapcar '[b][color=NAVY]([/color][/b]lambda [b][color=MAROON]([/color][/b] n v / [b][color=MAROON])[/color][/b] [b][color=MAROON]([/color][/b]setvar n v[b][color=MAROON])[/color][/b][b][color=NAVY])[/color][/b] [b][color=NAVY]([/color][/b]mapcar 'car SysVarLst[b][color=NAVY])[/color][/b] [b][color=NAVY]([/color][/b]mapcar 'caddr SysVarLst[b][color=NAVY])[/color][/b][b][color=FUCHSIA])[/color][/b]

[b][color=FUCHSIA]([/color][/b]while [b][color=NAVY]([/color][/b]/= [b][color=MAROON]([/color][/b]getvar 'errno[b][color=MAROON])[/color][/b] 52[b][color=NAVY])[/color][/b] [color=#8b4513]; enclose in a loop, until we have the correct entity[/color]
	[b][color=NAVY]([/color][/b]setq e [b][color=MAROON]([/color][/b]car [b][color=GREEN]([/color][/b]entsel [color=#2f4f4f]"\nSelect attributed dynamic block: "[/color][b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b][b][color=NAVY])[/color][/b]
	[b][color=NAVY]([/color][/b]cond
		[b][color=MAROON]([/color][/b][b][color=GREEN]([/color][/b]= [b][color=BLUE]([/color][/b]getvar 'errno[b][color=BLUE])[/color][/b] 7[b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]princ [color=#2f4f4f]"\nMissed, try again!"[/color][b][color=GREEN])[/color][/b][color=#8b4513]; non-nil return - stay in loop[/color]
			[b][color=GREEN]([/color][/b]setvar 'errno 0[b][color=GREEN])[/color][/b][color=#8b4513]; restore the 'errno' variable[/color]
		[b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b][b][color=GREEN]([/color][/b]not [b][color=BLUE]([/color][/b]= [b][color=RED]([/color][/b]type e[b][color=RED])[/color][/b] 'ENAME[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b][color=#8b4513]; user pressed enter[/color]
			[b][color=GREEN]([/color][/b]princ [color=#2f4f4f]"\nUser pressed enter, exiting."[/color][b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]setvar 'errno 52[b][color=GREEN])[/color][/b][color=#8b4513]; exit loop[/color]
			[b][color=GREEN]([/color][/b]setq e nil enx nil o nil[b][color=GREEN])[/color][/b][color=#8b4513]; don't proceed with the routine[/color]
		[b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b][b][color=GREEN]([/color][/b]/= [b][color=BLUE]([/color][/b]cdr [b][color=RED]([/color][/b]assoc 0 [b][color=PURPLE]([/color][/b]entget e[b][color=PURPLE])[/color][/b][b][color=RED])[/color][/b][b][color=BLUE])[/color][/b] [color=#2f4f4f]"INSERT"[/color][b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]princ [color=#2f4f4f]"\nYou must select a block!"[/color][b][color=GREEN])[/color][/b][color=#8b4513]; non-nil return - stay in loop[/color]
		[b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b][b][color=GREEN]([/color][/b]= [b][color=BLUE]([/color][/b]vlax-get [b][color=RED]([/color][/b]vlax-ename->vla-object e[b][color=RED])[/color][/b] 'IsDynamicBlock[b][color=BLUE])[/color][/b] :vlax-false[b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]princ [color=#2f4f4f]"\nThe selected block is not dynamic! "[/color][b][color=GREEN])[/color][/b][color=#8b4513]; non-nil return - stay in loop[/color]
		[b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b][b][color=GREEN]([/color][/b]or [b][color=BLUE]([/color][/b]/= [b][color=RED]([/color][/b]cdr [b][color=PURPLE]([/color][/b]assoc 66 [b][color=TEAL]([/color][/b]entget e[b][color=TEAL])[/color][/b][b][color=PURPLE])[/color][/b][b][color=RED])[/color][/b] 1[b][color=BLUE])[/color][/b] [b][color=BLUE]([/color][/b]= [b][color=RED]([/color][/b]vlax-get [b][color=PURPLE]([/color][/b]vlax-ename->vla-object e[b][color=PURPLE])[/color][/b] 'HasAttributes[b][color=RED])[/color][/b] :vlax-false[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]princ [color=#2f4f4f]"\nThe selected block is not attributed! "[/color][b][color=GREEN])[/color][/b][color=#8b4513]; non-nil return - stay in loop[/color]
		[b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b]T
			[b][color=GREEN]([/color][/b]setq enx [b][color=BLUE]([/color][/b]entget e[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]setq o [b][color=BLUE]([/color][/b]vlax-ename->vla-object e[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]setvar 'errno 52[b][color=GREEN])[/color][/b][color=#8b4513]; we got the correct entity - exit loop[/color]
		[b][color=MAROON])[/color][/b]
	[b][color=NAVY])[/color][/b][color=#8b4513]; cond[/color]
[b][color=FUCHSIA])[/color][/b][color=#8b4513]; while[/color]

[b][color=FUCHSIA]([/color][/b]if [b][color=NAVY]([/color][/b]and e enx o[b][color=NAVY])[/color][/b]
	[b][color=NAVY]([/color][/b]progn
		[b][color=MAROON]([/color][/b]setq EffName [b][color=GREEN]([/color][/b]vlax-get o 'EffectiveName[b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b]setq SSX [b][color=GREEN]([/color][/b]ssget [color=#2f4f4f]"_X"[/color] [b][color=BLUE]([/color][/b]list [b][color=RED]([/color][/b]assoc 0 enx[b][color=RED])[/color][/b][b][color=RED]([/color][/b]cons 410 [b][color=PURPLE]([/color][/b]getvar 'ctab[b][color=PURPLE])[/color][/b][b][color=RED])[/color][/b][b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b]repeat [b][color=GREEN]([/color][/b]setq i [b][color=BLUE]([/color][/b]sslength SSX[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]setq en [b][color=BLUE]([/color][/b]ssname SSX [b][color=RED]([/color][/b]setq i [b][color=PURPLE]([/color][/b]1- i[b][color=PURPLE])[/color][/b][b][color=RED])[/color][/b][b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]setq SSX-Lst [b][color=BLUE]([/color][/b]cons en SSX-Lst[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b]
		[b][color=MAROON])[/color][/b][color=#8b4513]; repeat[/color]
		[b][color=MAROON]([/color][/b]if SSX-Lst
			[b][color=GREEN]([/color][/b]progn
				[b][color=BLUE]([/color][/b]setq BlksLst 
					[b][color=RED]([/color][/b]vl-remove-if-not [b][color=PURPLE]([/color][/b]function [b][color=TEAL]([/color][/b]lambda [b][color=OLIVE]([/color][/b]x[b][color=OLIVE])[/color][/b] [b][color=OLIVE]([/color][/b]eq [b][color=GRAY]([/color][/b]vlax-get x 'EffectiveName[b][color=GRAY])[/color][/b] EffName[b][color=OLIVE])[/color][/b][b][color=TEAL])[/color][/b][b][color=PURPLE])[/color][/b]
					[b][color=PURPLE]([/color][/b]mapcar 'vlax-ename->vla-object SSX-Lst[b][color=PURPLE])[/color][/b][b][color=RED])[/color][/b]
				[b][color=BLUE])[/color][/b]
				[b][color=BLUE]([/color][/b]setq TempSS [b][color=RED]([/color][/b]ssadd[b][color=RED])[/color][/b][b][color=BLUE])[/color][/b]
				[b][color=BLUE]([/color][/b]foreach b BlksLst
					[b][color=RED]([/color][/b]vla-GetBoundingBox b 'll 'ur[b][color=RED])[/color][/b]
					[b][color=RED]([/color][/b]vla-ZoomWindow [b][color=PURPLE]([/color][/b]vlax-get-acad-object[b][color=PURPLE])[/color][/b] ll ur[b][color=RED])[/color][/b][color=#8b4513]; zoom to it[/color]
					[b][color=RED]([/color][/b]ssadd [b][color=PURPLE]([/color][/b]vlax-vla-object->ename b[b][color=PURPLE])[/color][/b] TempSS[b][color=RED])[/color][/b]
					[b][color=RED]([/color][/b]sssetfirst nil TempSS[b][color=RED])[/color][/b][color=#8b4513]; grip it[/color]
					[b][color=RED]([/color][/b]foreach att [b][color=PURPLE]([/color][/b]vlax-safearray->list [b][color=TEAL]([/color][/b]vlax-variant-value [b][color=OLIVE]([/color][/b]vla-GetAttributes b[b][color=OLIVE])[/color][/b][b][color=TEAL])[/color][/b][b][color=PURPLE])[/color][/b]
						[b][color=PURPLE]([/color][/b]setq str 
							[b][color=TEAL]([/color][/b]getstring t [b][color=OLIVE]([/color][/b]strcat [color=#2f4f4f]"\nInput value for the \"[/color][color=#2f4f4f]" [b][color=GRAY]([/color][/b]vla-get-TagString att[b][color=GRAY])[/color][/b] "[/color]\[color=#2f4f4f]" tag
							\n < \"[/color][color=#2f4f4f]" [b][color=GRAY]([/color][/b]vla-get-TextString att[b][color=GRAY])[/color][/b] "[/color]\[color=#2f4f4f]" > or press ENTER to skip :"[/color][b][color=OLIVE])[/color][/b][b][color=TEAL])[/color][/b]
						[b][color=PURPLE])[/color][/b]
						[b][color=PURPLE]([/color][/b]if [b][color=TEAL]([/color][/b]/= str [color=#2f4f4f]""[/color][b][color=TEAL])[/color][/b] [b][color=TEAL]([/color][/b]vlax-put att 'TextString str[b][color=TEAL])[/color][/b][b][color=PURPLE])[/color][/b]
					[b][color=RED])[/color][/b]
					[b][color=RED]([/color][/b]vla-update b[b][color=RED])[/color][/b][color=#8b4513]; update the block, necessary?[/color]
					[b][color=RED]([/color][/b]if [b][color=PURPLE]([/color][/b]not c[b][color=PURPLE])[/color][/b] [b][color=PURPLE]([/color][/b]setq c [b][color=TEAL]([/color][/b]length BlksLst[b][color=TEAL])[/color][/b][b][color=PURPLE])[/color][/b][b][color=RED])[/color][/b]
					[b][color=RED]([/color][/b]princ [b][color=PURPLE]([/color][/b]strcat [color=#2f4f4f]"\nMoving on to the next block, "[/color] [b][color=TEAL]([/color][/b]itoa [b][color=OLIVE]([/color][/b]setq c [b][color=GRAY]([/color][/b]1- c[b][color=GRAY])[/color][/b][b][color=OLIVE])[/color][/b][b][color=TEAL])[/color][/b] [color=#2f4f4f]" remaining!"[/color][b][color=PURPLE])[/color][/b][b][color=RED])[/color][/b]
					[b][color=RED]([/color][/b]sssetfirst nil nil[b][color=RED])[/color][/b][color=#8b4513]; ungrip it[/color]
					[b][color=RED]([/color][/b]ssdel [b][color=PURPLE]([/color][/b]vlax-vla-object->ename b[b][color=PURPLE])[/color][/b] TempSS[b][color=RED])[/color][/b]
				[b][color=BLUE])[/color][/b][color=#8b4513]; foreach[/color]
			[b][color=GREEN])[/color][/b][color=#8b4513]; progn[/color]
			
		[b][color=MAROON])[/color][/b][color=#8b4513]; if SSX-Lst[/color]
		[b][color=MAROON]([/color][/b]princ [color=#2f4f4f]"\nCongratulations, you are done!"[/color][b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b]vla-ZoomExtents [b][color=GREEN]([/color][/b]vlax-get-acad-object[b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b][color=#8b4513]; not sure how to restore the zoom to the original state[/color]
		[b][color=MAROON]([/color][/b]vla-Regen [b][color=GREEN]([/color][/b]vla-get-ActiveDocument [b][color=BLUE]([/color][/b]vlax-get-acad-object[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b] acActiveViewport[b][color=MAROON])[/color][/b]
	[b][color=NAVY])[/color][/b][color=#8b4513]; progn[/color]
[b][color=FUCHSIA])[/color][/b][color=#8b4513]; if [b][color=FUCHSIA]([/color][/b]and e enx o[b][color=FUCHSIA])[/color][/b][/color]

[b][color=FUCHSIA]([/color][/b]mapcar '[b][color=NAVY]([/color][/b]lambda [b][color=MAROON]([/color][/b] n v / [b][color=MAROON])[/color][/b] [b][color=MAROON]([/color][/b]setvar n v[b][color=MAROON])[/color][/b][b][color=NAVY])[/color][/b] [b][color=NAVY]([/color][/b]mapcar 'car SysVarLst[b][color=NAVY])[/color][/b] [b][color=NAVY]([/color][/b]mapcar 'cadr SysVarLst[b][color=NAVY])[/color][/b][b][color=FUCHSIA])[/color][/b]
[b][color=FUCHSIA]([/color][/b]if sUndo [b][color=NAVY]([/color][/b]vla-EndUndoMark [b][color=MAROON]([/color][/b]vla-get-ActiveDocument [b][color=GREEN]([/color][/b]vlax-get-acad-object[b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b][b][color=NAVY])[/color][/b][b][color=FUCHSIA])[/color][/b]

[b][color=FUCHSIA]([/color][/b]princ[b][color=FUCHSIA])[/color][/b]
[b][color=BLACK])[/color][/b][color=#8b4513];| defun |; [b][color=BLACK]([/color][/b]vl-load-com[b][color=BLACK])[/color][/b] [b][color=BLACK]([/color][/b]princ[b][color=BLACK])[/color][/b][/color]

 

Updated code.

 

A couple of questions appeared:

Is it possible to restore the original "zoomwindow" state, before calling the routine?

Any comments, how to properly set the "undo" operation and the UndoMark, within the *error* defun?

 

It was interesting to write this, and perhaps LM's code does a better job.

Edited by Grrr
Link to comment
Share on other sites

I was wondering on which of the forums to reply, and I've decided to post my attempt here:

[color=#8b4513]; Grrr[/color]
[color=#8b4513]; Upon selecting an attributed, dynamic block[/color]
[color=#8b4513]; user is prompted to change every attribute value, on every block with the same name, located on the current tab:[/color]
[b][color=BLACK]([/color][/b]defun C:test [b][color=FUCHSIA]([/color][/b] / *error* SysVarLst e enx o sUndo EffName SSX i en SSX-Lst BlksLst TempSS ll ur str b c att[b][color=FUCHSIA])[/color][/b][color=#8b4513]; <- UNTESTED![/color]
[b][color=FUCHSIA]([/color][/b]setvar 'errno 0[b][color=FUCHSIA])[/color][/b] [b][color=FUCHSIA]([/color][/b]sssetfirst nil nil[b][color=FUCHSIA])[/color][/b]

[b][color=FUCHSIA]([/color][/b]defun *error* [b][color=NAVY]([/color][/b] msg [b][color=NAVY])[/color][/b]
	[b][color=NAVY]([/color][/b]if sUndo [b][color=MAROON]([/color][/b]vla-EndUndoMark [b][color=GREEN]([/color][/b]vla-get-ActiveDocument [b][color=BLUE]([/color][/b]vlax-get-acad-object[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b][b][color=NAVY])[/color][/b]
	[b][color=NAVY]([/color][/b]if c [b][color=MAROON]([/color][/b]vla-SendCommand [b][color=GREEN]([/color][/b]vla-get-ActiveDocument [b][color=BLUE]([/color][/b]vlax-get-acad-object[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b] [color=#2f4f4f]"_.undo"[/color][b][color=MAROON])[/color][/b][b][color=NAVY])[/color][/b][color=#8b4513]; if the user reached till this point[/color]
	[b][color=NAVY]([/color][/b]if SysVarLst [b][color=MAROON]([/color][/b]mapcar '[b][color=GREEN]([/color][/b]lambda [b][color=BLUE]([/color][/b] n v / [b][color=BLUE])[/color][/b] [b][color=BLUE]([/color][/b]setvar n v[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b] [b][color=GREEN]([/color][/b]mapcar 'car SysVarLst[b][color=GREEN])[/color][/b] [b][color=GREEN]([/color][/b]mapcar 'cadr SysVarLst[b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b][b][color=NAVY])[/color][/b]
	[b][color=NAVY]([/color][/b]if 
		[b][color=MAROON]([/color][/b]or 
			[b][color=GREEN]([/color][/b]not [b][color=BLUE]([/color][/b]member msg '[b][color=RED]([/color][/b][color=#2f4f4f]"Function cancelled"[/color] [color=#2f4f4f]"quit / exit abort"[/color][b][color=RED])[/color][/b][b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]wcmatch [b][color=BLUE]([/color][/b]strcase msg[b][color=BLUE])[/color][/b] [color=#2f4f4f]"*BREAK,*CANCEL*,*EXIT*"[/color][b][color=GREEN])[/color][/b]
		[b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b]princ [b][color=GREEN]([/color][/b]strcat [color=#2f4f4f]"\nError: "[/color] msg[b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b]
	[b][color=NAVY])[/color][/b]
	[b][color=NAVY]([/color][/b]princ[b][color=NAVY])[/color][/b]
[b][color=FUCHSIA])[/color][/b]

[b][color=FUCHSIA]([/color][/b]setq SysVarLst
	[b][color=NAVY]([/color][/b]mapcar [b][color=MAROON]([/color][/b]function [b][color=GREEN]([/color][/b]lambda [b][color=BLUE]([/color][/b] a b / [b][color=BLUE])[/color][/b] [b][color=BLUE]([/color][/b]list a [b][color=RED]([/color][/b]getvar a[b][color=RED])[/color][/b] b[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b]list [color=#2f4f4f]"CLIPROMPTLINES"[/color] [color=#2f4f4f]"CMDECHO"[/color] [color=#2f4f4f]"BLIPMODE"[/color] [color=#2f4f4f]"NOMUTT"[/color][b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b]list 3 0 0 0[b][color=MAROON])[/color][/b]
	[b][color=NAVY])[/color][/b]
[b][color=FUCHSIA])[/color][/b]

[b][color=FUCHSIA]([/color][/b]setq sUndo [b][color=NAVY]([/color][/b]vla-StartUndoMark [b][color=MAROON]([/color][/b]vla-get-ActiveDocument [b][color=GREEN]([/color][/b]vlax-get-acad-object[b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b][b][color=NAVY])[/color][/b][b][color=FUCHSIA])[/color][/b]
[b][color=FUCHSIA]([/color][/b]mapcar '[b][color=NAVY]([/color][/b]lambda [b][color=MAROON]([/color][/b] n v / [b][color=MAROON])[/color][/b] [b][color=MAROON]([/color][/b]setvar n v[b][color=MAROON])[/color][/b][b][color=NAVY])[/color][/b] [b][color=NAVY]([/color][/b]mapcar 'car SysVarLst[b][color=NAVY])[/color][/b] [b][color=NAVY]([/color][/b]mapcar 'caddr SysVarLst[b][color=NAVY])[/color][/b][b][color=FUCHSIA])[/color][/b]

[b][color=FUCHSIA]([/color][/b]while [b][color=NAVY]([/color][/b]/= [b][color=MAROON]([/color][/b]getvar 'errno[b][color=MAROON])[/color][/b] 52[b][color=NAVY])[/color][/b] [color=#8b4513]; enclose in a loop, until we have the correct entity[/color]
	[b][color=NAVY]([/color][/b]setq e [b][color=MAROON]([/color][/b]car [b][color=GREEN]([/color][/b]entsel [color=#2f4f4f]"\nSelect attributed dynamic block: "[/color][b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b][b][color=NAVY])[/color][/b]
	[b][color=NAVY]([/color][/b]cond
		[b][color=MAROON]([/color][/b][b][color=GREEN]([/color][/b]= [b][color=BLUE]([/color][/b]getvar 'errno[b][color=BLUE])[/color][/b] 7[b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]princ [color=#2f4f4f]"\nMissed, try again!"[/color][b][color=GREEN])[/color][/b][color=#8b4513]; non-nil return - stay in loop[/color]
			[b][color=GREEN]([/color][/b]setvar 'errno 0[b][color=GREEN])[/color][/b][color=#8b4513]; restore the 'errno' variable[/color]
		[b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b][b][color=GREEN]([/color][/b]/= [b][color=BLUE]([/color][/b]cdr [b][color=RED]([/color][/b]assoc 0 [b][color=PURPLE]([/color][/b]entget e[b][color=PURPLE])[/color][/b][b][color=RED])[/color][/b][b][color=BLUE])[/color][/b] [color=#2f4f4f]"INSERT"[/color][b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]princ [color=#2f4f4f]"\nYou must select a block!"[/color][b][color=GREEN])[/color][/b][color=#8b4513]; non-nil return - stay in loop[/color]
		[b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b][b][color=GREEN]([/color][/b]or [b][color=BLUE]([/color][/b]/= [b][color=RED]([/color][/b]cdr [b][color=PURPLE]([/color][/b]assoc 66 [b][color=TEAL]([/color][/b]entget e[b][color=TEAL])[/color][/b][b][color=PURPLE])[/color][/b][b][color=RED])[/color][/b] 1[b][color=BLUE])[/color][/b] [b][color=BLUE]([/color][/b]= [b][color=RED]([/color][/b]vlax-get [b][color=PURPLE]([/color][/b]vlax-ename->vla-object e[b][color=PURPLE])[/color][/b] 'HasAttributes[b][color=RED])[/color][/b] :vlax-false[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]princ [color=#2f4f4f]"\nThe selected block is not attributed! "[/color][b][color=GREEN])[/color][/b][color=#8b4513]; non-nil return - stay in loop[/color]
		[b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b][b][color=GREEN]([/color][/b]= [b][color=BLUE]([/color][/b]vlax-get [b][color=RED]([/color][/b]vlax-ename->vla-object e[b][color=RED])[/color][/b] 'IsDynamicBlock[b][color=BLUE])[/color][/b] :vlax-false[b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]princ [color=#2f4f4f]"\nThe selected block is not dynamic! "[/color][b][color=GREEN])[/color][/b][color=#8b4513]; non-nil return - stay in loop[/color]
		[b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b][b][color=GREEN]([/color][/b]not [b][color=BLUE]([/color][/b]= [b][color=RED]([/color][/b]type e[b][color=RED])[/color][/b] 'ENAME[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b][color=#8b4513]; user pressed enter[/color]
			[b][color=GREEN]([/color][/b]princ [color=#2f4f4f]"\nUser pressed enter, exiting."[/color][b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]setvar 'errno 52[b][color=GREEN])[/color][/b][color=#8b4513]; exit loop[/color]
			[b][color=GREEN]([/color][/b]setq e nil enx nil o nil[b][color=GREEN])[/color][/b][color=#8b4513]; don't proceed with the routine[/color]
		[b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b]T
			[b][color=GREEN]([/color][/b]setq enx [b][color=BLUE]([/color][/b]entget e[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]setq o [b][color=BLUE]([/color][/b]vlax-ename->vla-object e[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]setvar 'errno 52[b][color=GREEN])[/color][/b][color=#8b4513]; we got the correct entity - exit loop[/color]
		[b][color=MAROON])[/color][/b]
	[b][color=NAVY])[/color][/b][color=#8b4513]; cond[/color]
[b][color=FUCHSIA])[/color][/b][color=#8b4513]; while[/color]

[b][color=FUCHSIA]([/color][/b]if [b][color=NAVY]([/color][/b]and e enx o[b][color=NAVY])[/color][/b]
	[b][color=NAVY]([/color][/b]progn
		[b][color=MAROON]([/color][/b]setq EffName [b][color=GREEN]([/color][/b]vlax-get o 'EffectiveName[b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b]setq SSX [b][color=GREEN]([/color][/b]ssget [color=#2f4f4f]"_X"[/color] [b][color=BLUE]([/color][/b]list [b][color=RED]([/color][/b]assoc 0 enx[b][color=RED])[/color][/b][b][color=RED]([/color][/b]cons 410 [b][color=PURPLE]([/color][/b]getvar 'ctab[b][color=PURPLE])[/color][/b][b][color=RED])[/color][/b][b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b]repeat [b][color=GREEN]([/color][/b]setq i [b][color=BLUE]([/color][/b]sslength SSX[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]setq en [b][color=BLUE]([/color][/b]ssname SSX [b][color=RED]([/color][/b]setq i [b][color=PURPLE]([/color][/b]1- i[b][color=PURPLE])[/color][/b][b][color=RED])[/color][/b][b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b]
			[b][color=GREEN]([/color][/b]setq SSX-Lst [b][color=BLUE]([/color][/b]cons en SSX-Lst[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b]
		[b][color=MAROON])[/color][/b][color=#8b4513]; repeat[/color]
		[b][color=MAROON]([/color][/b]if SSX-Lst
			[b][color=GREEN]([/color][/b]progn
				[b][color=BLUE]([/color][/b]setq BlksLst 
					[b][color=RED]([/color][/b]vl-remove-if-not [b][color=PURPLE]([/color][/b]function [b][color=TEAL]([/color][/b]lambda [b][color=OLIVE]([/color][/b]x[b][color=OLIVE])[/color][/b] [b][color=OLIVE]([/color][/b]eq [b][color=GRAY]([/color][/b]vlax-get x 'EffectiveName[b][color=GRAY])[/color][/b] EffName[b][color=OLIVE])[/color][/b][b][color=TEAL])[/color][/b][b][color=PURPLE])[/color][/b]
					[b][color=PURPLE]([/color][/b]mapcar 'vlax-ename->vla-object SSX-Lst[b][color=PURPLE])[/color][/b][b][color=RED])[/color][/b]
				[b][color=BLUE])[/color][/b]
				[b][color=BLUE]([/color][/b]setq TempSS [b][color=RED]([/color][/b]ssadd[b][color=RED])[/color][/b][b][color=BLUE])[/color][/b]
				[b][color=BLUE]([/color][/b]foreach b BlksLst
					[b][color=RED]([/color][/b]vla-GetBoundingBox b 'll 'ur[b][color=RED])[/color][/b]
					[b][color=RED]([/color][/b]vla-ZoomWindow [b][color=PURPLE]([/color][/b]vlax-get-acad-object[b][color=PURPLE])[/color][/b] ll ur[b][color=RED])[/color][/b][color=#8b4513]; zoom to it[/color]
					[b][color=RED]([/color][/b]ssadd [b][color=PURPLE]([/color][/b]vlax-vla-object->ename b[b][color=PURPLE])[/color][/b] TempSS[b][color=RED])[/color][/b]
					[b][color=RED]([/color][/b]sssetfirst nil TempSS[b][color=RED])[/color][/b][color=#8b4513]; grip it[/color]
					[b][color=RED]([/color][/b]foreach att [b][color=PURPLE]([/color][/b]vlax-safearray->list [b][color=TEAL]([/color][/b]vlax-variant-value [b][color=OLIVE]([/color][/b]vla-GetAttributes b[b][color=OLIVE])[/color][/b][b][color=TEAL])[/color][/b][b][color=PURPLE])[/color][/b]
						[b][color=PURPLE]([/color][/b]setq str 
							[b][color=TEAL]([/color][/b]getstring t [b][color=OLIVE]([/color][/b]strcat [color=#2f4f4f]"\nInput value for the \"[/color][color=#2f4f4f]" [b][color=GRAY]([/color][/b]vla-get-TagString att[b][color=GRAY])[/color][/b] "[/color]\[color=#2f4f4f]" tag
							\n < \"[/color][color=#2f4f4f]" [b][color=GRAY]([/color][/b]vla-get-TextString att[b][color=GRAY])[/color][/b] "[/color]\[color=#2f4f4f]" > or press ENTER to skip :"[/color][b][color=OLIVE])[/color][/b][b][color=TEAL])[/color][/b]
						[b][color=PURPLE])[/color][/b]
						[b][color=PURPLE]([/color][/b]if [b][color=TEAL]([/color][/b]/= str [color=#2f4f4f]""[/color][b][color=TEAL])[/color][/b] [b][color=TEAL]([/color][/b]vlax-put att 'TextString str[b][color=TEAL])[/color][/b][b][color=PURPLE])[/color][/b]
					[b][color=RED])[/color][/b]
					[b][color=RED]([/color][/b]vla-update b[b][color=RED])[/color][/b][color=#8b4513]; update the block, nessecary?[/color]
					[b][color=RED]([/color][/b]if [b][color=PURPLE]([/color][/b]not c[b][color=PURPLE])[/color][/b] [b][color=PURPLE]([/color][/b]setq c [b][color=TEAL]([/color][/b]length BlksLst[b][color=TEAL])[/color][/b][b][color=PURPLE])[/color][/b][b][color=RED])[/color][/b]
					[b][color=RED]([/color][/b]princ [b][color=PURPLE]([/color][/b]strcat [color=#2f4f4f]"\nMoving on to the next block, "[/color] [b][color=TEAL]([/color][/b]itoa [b][color=OLIVE]([/color][/b]setq c [b][color=GRAY]([/color][/b]1- c[b][color=GRAY])[/color][/b][b][color=OLIVE])[/color][/b][b][color=TEAL])[/color][/b] [color=#2f4f4f]" remaining!"[/color][b][color=PURPLE])[/color][/b][b][color=RED])[/color][/b]
					[b][color=RED]([/color][/b]sssetfirst nil nil[b][color=RED])[/color][/b][color=#8b4513]; ungrip it[/color]
					[b][color=RED]([/color][/b]ssdel [b][color=PURPLE]([/color][/b]vlax-vla-object->ename b[b][color=PURPLE])[/color][/b] TempSS[b][color=RED])[/color][/b]
				[b][color=BLUE])[/color][/b][color=#8b4513]; foreach[/color]
			[b][color=GREEN])[/color][/b][color=#8b4513]; progn[/color]
			
		[b][color=MAROON])[/color][/b][color=#8b4513]; if SSX-Lst[/color]
		[b][color=MAROON]([/color][/b]princ [color=#2f4f4f]"\nCongratulations, you are done!"[/color][b][color=MAROON])[/color][/b]
		[b][color=MAROON]([/color][/b]vla-ZoomExtents [b][color=GREEN]([/color][/b]vlax-get-acad-object[b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b][color=#8b4513]; not sure how to restore the zoom to the original state[/color]
		[b][color=MAROON]([/color][/b]vla-Regen [b][color=GREEN]([/color][/b]vla-get-ActiveDocument [b][color=BLUE]([/color][/b]vlax-get-acad-object[b][color=BLUE])[/color][/b][b][color=GREEN])[/color][/b] acActiveViewport[b][color=MAROON])[/color][/b]
	[b][color=NAVY])[/color][/b][color=#8b4513]; progn[/color]
[b][color=FUCHSIA])[/color][/b][color=#8b4513]; if [b][color=FUCHSIA]([/color][/b]and e enx o[b][color=FUCHSIA])[/color][/b][/color]

[b][color=FUCHSIA]([/color][/b]mapcar '[b][color=NAVY]([/color][/b]lambda [b][color=MAROON]([/color][/b] n v / [b][color=MAROON])[/color][/b] [b][color=MAROON]([/color][/b]setvar n v[b][color=MAROON])[/color][/b][b][color=NAVY])[/color][/b] [b][color=NAVY]([/color][/b]mapcar 'car SysVarLst[b][color=NAVY])[/color][/b] [b][color=NAVY]([/color][/b]mapcar 'cadr SysVarLst[b][color=NAVY])[/color][/b][b][color=FUCHSIA])[/color][/b]
[b][color=FUCHSIA]([/color][/b]if sUndo [b][color=NAVY]([/color][/b]vla-EndUndoMark [b][color=MAROON]([/color][/b]vla-get-ActiveDocument [b][color=GREEN]([/color][/b]vlax-get-acad-object[b][color=GREEN])[/color][/b][b][color=MAROON])[/color][/b][b][color=NAVY])[/color][/b][b][color=FUCHSIA])[/color][/b]

[b][color=FUCHSIA]([/color][/b]princ[b][color=FUCHSIA])[/color][/b]
[b][color=BLACK])[/color][/b][color=#8b4513];| defun |; [b][color=BLACK]([/color][/b]vl-load-com[b][color=BLACK])[/color][/b] [b][color=BLACK]([/color][/b]princ[b][color=BLACK])[/color][/b][/color]

 

A couple of questions appeared:

Is it possible to restore the original "zoomwindow" state, before calling the routine?

Any comments, how to properly set the "undo" operation and the UndoMark, within the *error* defun?

 

It was interesting to write this, and perhaps LM's code does a better job.

 

THank you for posting. Unfortunately I didn't say that I am also using ACAD on Mac, and after some googling, I realized that some of these LISP routines will not run. I really appreciate you taking the time to write this though. I wish I could test.

Link to comment
Share on other sites

THank you for posting. Unfortunately I didn't say that I am also using ACAD on Mac, and after some googling, I realized that some of these LISP routines will not run. I really appreciate you taking the time to write this though. I wish I could test.

 

I'm sure that Lee Mac could do this to work on your Mac. ;) as I'm guessing/remembering that visual lisp is not supported on Mac OS.

Link to comment
Share on other sites

I'm sure that Lee Mac could do this to work on your Mac. ;) as I'm guessing/remembering that visual lisp is not supported on Mac OS.

 

I hope so! I found this online

;; Formerly TIP 1011: ME.LSP (C)1994, Gary Goode
;; (I've changed the name to DD.LSP and changed the defun to DD, B.K.)

;This program will let you pick and edit multi text and attributes
;by window, pick or crossing using dialog boxes.
;-----------------------------------------------------------------
(defun C:DD (/ A B C D E F G H J K L M )      
  (graphscr)
  (setvar "BLIPMODE" 0)
  (setvar "CMDECHO" 0)
  (setvar "HIGHLIGHT" 1)
  (prompt "\nMulti-Edit is loaded ...  ")
  (setq A (ssget) B (sslength A) C 0)                  
  (while (< C B) (setq D (ssname A C) E (entget D))
     (setq F (car E))
     (setq G (cdr E))
     (setq H (car G))
     (setq J (cdr H))
     (setq K "TEXT")
     (setq L "INSERT")
     (setq M "DIMENSION")
     (if (= J K)(command ".ddedit" D ""))   
     (if (= J L)(command ".ddatte" D ))
     (if (= J M)(prompt "\n You picked a dimension, I only do text or attributes ..."))(terpri)  
  (setq C (1+ C)))
  (princ)
); end me.lsp

 

That does work on MAC, and it does do the job, but I have to manually go around the entire drawing and select all the blocks I would like to work on. It is also older, I'm sure anything you or Lee (or others) can do would be more streamlined. Thank you

Link to comment
Share on other sites

If you only want blocks a crude patch

 

 

(setq A (ssget (list (cons 0 "INSERT")))

 

 

You can expand to pick one block name only as I mentioned in my earlier post it should work on the MAC. I thought I would let you figure it out hint replace ss with A

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...