Jump to content
Guest John Dory

I need a 3d house

Recommended Posts

Guest John Dory

Can someone give me a 3d house thats is rendered

Share this post


Link to post
Share on other sites
gcp310

check out 3d cafe.com or accustudio.com in their free download section

 

G

Share this post


Link to post
Share on other sites
Mr T
Can someone give me a 3d house thats is rendered

 

http://www.freemodels.com

 

Try the SAMPLES folder on your installation.

 

Nick

Share this post


Link to post
Share on other sites
saj1l

hi,

 

i am really stuck on autocad, and wondered if some one could make me a house that contains the following, on autocad 2009

 

The drawings need to contain as a minimum:

1. Foundations

 

2. A general arrangement that includes surrounding buildings, roads and topography

3. Ground Floor Plan (must contain these rooms Kitchen 3580mm x 2740mm; Breakfast room 2740mm x 2440mm; Living room 4800mm x 4040mm) plus garage 5290 x 2670; WC 1520 x 2740 (15%)

4. First Floor Plan (must contain these rooms Bedroom1 4110mm x 3430mm; Bedroom2 3510mm x 2820mm; Master Bedroom 4270mm x 2670mm; Bathroom)

5. Front Elevation showing a cross section of the house showing the roof; ground; first floor and foundation. This will include the structure of a wall showing cross section of the bricks; cavity and a window.

6. Innovation (this may include 3d modeling work within ADT)

 

You can if you wish add extra features such as garage space; conservatory; porches or extra structural details.

 

 

thanks!

Share this post


Link to post
Share on other sites
Cad64

Do you have any idea the amount of work you're asking someone to do, for free? :shock:

 

Is this a school assignment? :unsure:

Share this post


Link to post
Share on other sites
BOB'27T

I doubt that anyone will draw one for you. Check out this website, you can buy one from them.

www.3dcadbrowser.com

Share this post


Link to post
Share on other sites
Ritch7
hi,

 

i am really stuck on autocad, and wondered if some one could make me a house that contains the following, on autocad 2009

 

The drawings need to contain as a minimum:

1. Foundations

 

2. A general arrangement that includes surrounding buildings, roads and topography

3. Ground Floor Plan (must contain these rooms Kitchen 3580mm x 2740mm; Breakfast room 2740mm x 2440mm; Living room 4800mm x 4040mm) plus garage 5290 x 2670; WC 1520 x 2740 (15%)

4. First Floor Plan (must contain these rooms Bedroom1 4110mm x 3430mm; Bedroom2 3510mm x 2820mm; Master Bedroom 4270mm x 2670mm; Bathroom)

 

 

5. Front Elevation showing a cross section of the house showing the roof; ground; first floor and foundation. This will include the structure of a wall showing cross section of the bricks; cavity and a window.

6. Innovation (this may include 3d modeling work within ADT)

 

You can if you wish add extra features such as garage space; conservatory; porches or extra structural details.

 

 

thanks!

 

 

 

 

Hilarious....

Share this post


Link to post
Share on other sites
ReMark

"hi,

 

i am really stuck on autocad, and wondered if some one could make me a house that contains the following, on autocad 2009"

 

That is one bold request for a first post if you ask me.:o No real introduction (this is who I am). No real people skills (ever hear the words: Please and Thank you?). No real explanation (someone is holding a gun to my head and making me beg you for this).

 

Sure, why not? I'll do it. How much are you willing to pay me? I'll just stop doing my job (sorry, boss) and jump right on your drawings because "you are the man!"

 

Thanks. You just made me laugh.:lol:

Share this post


Link to post
Share on other sites
saj1l

lol, i'm sorry if i appeared too forward, the truth is yes this is part of an assignment, and if someone did do this for me, i would be willing to pay for it, any takers?

Share this post


Link to post
Share on other sites
ReMark

You're not serious are you? Sounds like a scam to me. No thanks.

Share this post


Link to post
Share on other sites
saj1l
You're not serious are you? Sounds like a scam to me. No thanks.

 

seriously i am 100% serious, i am a student from the uk, think about is, if i was scamming you, what would i possibly be getting out of it?

Share this post


Link to post
Share on other sites
Ritch7

oh my lord hes serious

 

remark will do it for you, but dont pay him, pay him in BIO FUEL , you know robots - terminiator etc

Share this post


Link to post
Share on other sites
ReMark

Free drawings.

 

If you're really serious then you should post under the Jobs section of the forum. I'm sure you'd get a few replies. Just be prepared for a lot of questions. Be sure to state up front who you are, what you're looking for and anything else that might be important to a person seriously thinking of "working" for you. Ask yourself, "What would I want to know before going into this?"

Share this post


Link to post
Share on other sites
ReMark

Thanks, Ritch. Are you tracking me or something? I've got all the 5W-30 I need in my cellar. I could use a new LCD monitor though.

Share this post


Link to post
Share on other sites
Cad64

The drawings need to contain as a minimum:

1. Foundations

 

2. A general arrangement that includes surrounding buildings, roads and topography

3. Ground Floor Plan (must contain these rooms Kitchen 3580mm x 2740mm; Breakfast room 2740mm x 2440mm; Living room 4800mm x 4040mm) plus garage 5290 x 2670; WC 1520 x 2740 (15%)

4. First Floor Plan (must contain these rooms Bedroom1 4110mm x 3430mm; Bedroom2 3510mm x 2820mm; Master Bedroom 4270mm x 2670mm; Bathroom)

5. Front Elevation showing a cross section of the house showing the roof; ground; first floor and foundation. This will include the structure of a wall showing cross section of the bricks; cavity and a window.

6. Innovation (this may include 3d modeling work within ADT)

 

You can if you wish add extra features such as garage space; conservatory; porches or extra structural details.

 

From what you've stated here, and at my hourly rate, I wouldn't even consider doing this for less than $3,000 U.S. And that's only if I could get past the part about this being a school assignment. Something you are supposed to be doing yourself.

 

This is seriously at least 2 weeks worth of work.

Share this post


Link to post
Share on other sites
ReMark

I checked the "jobs" section but it doesn't look like saj1l posted a "help wanted" ad. I guess he had a change of heart or he got the class "nerd" to do the work for him.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...