beem Posted February 18, 2020 Share Posted February 18, 2020 does any one has any sample to Structural drafting project Plate 3,4,7 Thank you Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 18, 2020 Share Posted February 18, 2020 (edited) Plates 3 and 4 call for building sections if I am not mistaken. Plate 7 calls for both a foundation detail (of one of the footings/pier) and a connection detail showing how the main columns are secured to the pad. None of these drawings are that difficult to produce on your own. What is it that you are stuck on? Re: Plate 7 - Structural project. As I told you in one of the private messages we exchanged previously the drawings you have requested to see are already posted here at CADTutor. For example, the details required in Plate 7 can be found on page 2, the 19th post from the top, of this thread: This link is to a thread that boasts over 190 replies. You should find everything you need. If you still have any questions come back to this thread and ask. Do not start a separate thread. By keeping all of your questions and any replies in this one thread it makes it easier for others to follow the course of the conversation. Thank you. Edited February 20, 2020 by ReMark Quote Link to comment Share on other sites More sharing options...
beem Posted February 20, 2020 Author Share Posted February 20, 2020 Thank you I'm reading all Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.