James Posted July 18, 2007 Posted July 18, 2007 can you reset the total editing time for a drawing back to 0? Quote
Norts Posted July 18, 2007 Posted July 18, 2007 can you reset the total editing time for a drawing back to 0? According to the AutoCAD help file: Total Editing Time Displays the time spent editing the current drawing. This timer is updated by the program and cannot be reset or stopped. Plotting time is not included in the total editing time. If you quit the editing session without saving the drawing, the time you spent in the editing session is not added to the accumulated editing time. Quote
dbroada Posted July 18, 2007 Posted July 18, 2007 you could save it as a DXF and use word pad to reset it if you really want Quote
James Posted July 18, 2007 Author Posted July 18, 2007 you could save it as a DXF and use word pad to reset it if you really want never heard of doing that! i wasnt too fussed, it was just all my drawings are drawn from a Template and the total editing time is getting large now , so on some jobs i looks like it has taken me 140+ hours to do a drawing Quote
Guest Alan Cullen Posted July 18, 2007 Posted July 18, 2007 can you reset the total editing time for a drawing back to 0? Why ?......who really cares ?......I have a drawing opened for a long time while I work in another bit of software......so all that time is recorded as active editing time for the drawing.......I have multiple drawings opened for reference......and it all counts towards total editing time??? If accountants use that for billing purposes, then someone should show them the reality....... Quote
dbroada Posted July 18, 2007 Posted July 18, 2007 never heard of doing that!DXFs can be very usefull for manipulating drawings - its how I can produce about 1000 loop drawings in about an hour. However if you make a mistake you can crash AutoCAD. Give it a try. Quote
zars Posted July 18, 2007 Posted July 18, 2007 Why ?......who really cares ?......I have a drawing opened for a long time while I work in another bit of software......so all that time is recorded as active editing time for the drawing.......I have multiple drawings opened for reference......and it all counts towards total editing time??? If accountants use that for billing purposes, then someone should show them the reality....... but is the time recorded even if you don't save the changes??? Quote
Strix Posted July 18, 2007 Posted July 18, 2007 in answer: According to the AutoCAD help file:Total Editing Time Displays the time spent editing the current drawing. This timer is updated by the program and cannot be reset or stopped. Plotting time is not included in the total editing time. If you quit the editing session without saving the drawing, the time you spent in the editing session is not added to the accumulated editing time. can you copy with basepoint the entire contents of your drawing into a new file? Quote
Methuselah Posted July 30, 2008 Posted July 30, 2008 Using the command "time" and "r" will reset the timer... Quote
GDog Posted March 12, 2009 Posted March 12, 2009 you can not reset the total editing time, but there is a way around it. First save your drawing to be reset. Next, use the NEW command to create a new drawing. Under the Select Template switch from DWT to DWG and find your saved drawing. Using this you will start a new drawing with all of your old drawing information and the timer will start again at 0. Quote
Tiger Posted March 13, 2009 Posted March 13, 2009 Nice tip GDog - but this thread is a bout a year old so I think James have got it done already :wink: Quote
GDog Posted March 16, 2009 Posted March 16, 2009 Hi Tiger, I would hope he has, but for guys like me that snoop around looking for answers like this, it never hurts to respond. Have a good one! Quote
Organic Posted January 19, 2014 Posted January 19, 2014 you can not reset the total editing time, but there is a way around it. First save your drawing to be reset. Next, use the NEW command to create a new drawing. Under the Select Template switch from DWT to DWG and find your saved drawing. Using this you will start a new drawing with all of your old drawing information and the timer will start again at 0. Thanks for the tip, this is exactly what I was looking to do [found with a Google search]. I knew I could copy the model into a new file and/or copy layouts (fro ma template) one at a time into the new file although I wasn't aware I could bring in the model and all layouts at once using your method. Hi Tiger, I would hope he has, but for guys like me that snoop around looking for answers like this, it never hurts to respond. Have a good one! It helped me 5 years on Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.