Sellis Posted February 11, 2009 Posted February 11, 2009 I am new to Civil 3D 2008 and I am trying to make a plan and profile sheet. The problem I am having is on the profile view the scale of the graph goes from 0 to 40, and I would like to make it from 5 to 25 to show more detail. I have changed the scale a few times and that didnt work. Any advice or tips would be helpful. Thank you. Quote
rustysilo Posted February 11, 2009 Posted February 11, 2009 Are you talking about the top and bottom of the grid? If so select the profile > right click > profile view properties > elevations tab > select user specified height and set the min. and max. as desired. Quote
Sellis Posted February 11, 2009 Author Posted February 11, 2009 Thank you so much for the help its always the easy changes that take all day, I spent half a day trying to figure this out. Quote
rustysilo Posted February 11, 2009 Posted February 11, 2009 No problem. I do the same thing sometimes. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.