Help: Section Line for Architecture Drawings

[mhy3sx]

I am searching for a lisp code to draw a section line like the test.dwg.

1) Select 2 points for the length of the section

2) Pick a point for the direction of the section

3) Draw section line with the arrows and ask for the section letter for exampl A,B

 

Thanks

TEST.dwg

[mhupp]

 

[mhy3sx]

(defun C:SECTIONLINE ( / pt1 pt2 dirpt baseAngle dirAngle angle
                        arrowLen arrowAng secLetter txtpt angleDeg
                        p1 p2 )


  (setq arrowLen 10.0)       
  (setq arrowAng (/ pi 6.0)) 


  (setq pt1 (getpoint "\nSelect first point of section line: "))
  (if (not (and pt1 (listp pt1)))
    (progn (princ "\nCanceled or invalid first point.") (quit))
  )

  (setq pt2 (getpoint pt1 "\nSelect second point of section line: "))
  (if (not (and pt2 (listp pt2)))
    (progn (princ "\nCanceled or invalid second point.") (quit))
  )

  (setq dirpt (getpoint "\nPick a point to define section direction: "))
  (if (not (and dirpt (listp dirpt)))
    (progn (princ "\nCanceled or invalid direction point.") (quit))
  )


  (setq baseAngle (angle pt1 pt2))
  (setq dirAngle (angle pt1 dirpt))
  (setq angle (if (< (abs (- baseAngle dirAngle)) (/ pi 2.0))
                baseAngle
                (+ baseAngle pi)))


  (command "._LINE" "_non" pt1 "_non" pt2 "")

  (setq p1 (polar pt1 (+ angle arrowAng) arrowLen))
  (setq p2 (polar pt1 (- angle arrowAng) arrowLen))
  (command "._LINE" "_non" pt1 "_non" p1 "")
  (command "._LINE" "_non" pt1 "_non" p2 "")


  (setq p1 (polar pt2 (+ angle arrowAng) arrowLen))
  (setq p2 (polar pt2 (- angle arrowAng) arrowLen))
  (command "._LINE" "_non" pt2 "_non" p1 "")
  (command "._LINE" "_non" pt2 "_non" p2 "")


  (setq secLetter (getstring T "\nEnter section letter (e.g., A, B): "))
  (if (= secLetter "") (setq secLetter "A"))


  (if (and (listp pt1) (listp pt2))
    (progn
      (setq txtpt (mapcar '(lambda (a b) (/ (+ a b) 2.0)) pt1 pt2))
      (setq angleDeg (* 180.0 (/ angle pi)))
      (command "._TEXT" "_non" txtpt 2.5 angleDeg (strcat secLetter "-" secLetter))
    )
    (princ "\nText not placed due to invalid points.")
  )

  (princ "\nSection line created successfully.")
  (princ)
)

 

 

I have this error (I use ZWCAD)

 

Command: SECTIONLINE

Select first point of section line: 
Select second point of section line: 
Pick a point to define section direction: 
Error: undefined function - nil

 

Thanks

[marko_ribar]

You haven't defined "arrowAng" variable and you are using it in (polar) function...

 

Sorry, my mistake - you defined it firstly...

Edited 25 minutes ago by marko_ribar