Bob658 Posted Wednesday at 12:22 PM Posted Wednesday at 12:22 PM I have two different models. both have the units set to metres and both have the scale set to 1:1_1. However when the 'Edit Drawing Scales' when you select the 1:1_1 it states at the bottom that '1 paper unit = 1 drawing unit' but in the other model ''1 paper unit = 0.001 drawing unit'. As you can't edit this I'm not sure how it happened. Can anybody shed any light on this.? Quote
CyberAngel Posted Wednesday at 01:13 PM Posted Wednesday at 01:13 PM How is "1:1_1" different from "1:1"? Is it possible there's a duplicate scale? Quote
Bob658 Posted Wednesday at 02:17 PM Author Posted Wednesday at 02:17 PM It's not a duplicate scale. As far as I'm aware 1:1_1 is a standard scale and generally that's the only one I use. Quote
BIGAL Posted 7 hours ago Posted 7 hours ago (edited) Need some more info, are you talking about plotting settings, we worked in metres, and when plotting just set the 1 printed unit = 1 drawing units, our title block was a A1 and if you checked the size of the title block in a layout it was 641x594. For A3 did 1 print = 2 drawing. Or is it annotation scaling ? Edited 7 hours ago by BIGAL Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.