How can I write the code for a batch fillet plugin for images like this?

[amook147]

Drawing2.dwg

 

As shown in the figure below:
Select multiple graphics in batch and change the R value from 0.2 to another value?

 

[SLW210]

Are you looking for a LISP, Python, VBA, .NET, etc.?

 

I moved your thread to the AutoLISP, Visual LISP & DCL Forum.

[BIGAL]

Code what's that for ?

 

Join Fillet R 0.4 P pickobject enter

 

All done

[mhupp]

1 hour ago, BIGAL said:

Code what's that for ?

Join Fillet R 0.4 P pickobject enter

All done

 

Have to fillet the 3 long arcs segments before joining. But yes no lisp needed for simple task.

 

 

 

 

 

[BIGAL]

The large arc is like the base radius for all the teeth, so changing that may need a complete redraw. behind the shape must be some form of formula, or design rules.

 

Sounds like a custom gear.lsp is needed.

Edited Saturday at 02:30 AM by BIGAL

[Tsuky]

@amook147

Try this

With your exemple seem to work's...

mdf_gear.lsp

[SLW210]

Much like Elvis, the OP seems to have left the building.

 

In case there is a dramatic return, here is a LISP that should work, though unclear what "code" they want or or if this is for an actual plug-in.

 

Solved: Fillet multiple polyline all at once by lisp - Autodesk Community

 

I didn't look at Kent Cooper's version to prompt for a radius, but used the original and added something simple to it. I am sure Kent Cooper's is better.

 

(defun C:FMP_R (/ plss n rad)
  (setq rad (getdist "\nEnter fillet radius: "))
  (if (and rad (> rad 0.0))
    (progn
      (command "_.fillet" "_radius" rad)
      (if (setq plss (ssget "_:L" '((0 . "LWPOLYLINE"))))
        (repeat (setq n (sslength plss))
          (command "_.fillet" "_polyline"
                   (ssname plss (setq n (1- n))))
        )
      )
    )
  )
  (princ)
)

 

[Nikon]

Lee Mac has a similar code.

The FMP_R and fpoly codes perform conjugations with a given radius. 
Only in these codes it is impossible to set the value radius = 0. 
Is there a code for interfacing with a radius of 0?

There's also the marko_ribar code, but I couldn't verify it. When loading, the message appears: Unknown command.

 

Edited 1 hour ago by Nikon