How can I write the code for a batch fillet plugin for images like this?

[amook147]

Drawing2.dwg

 

As shown in the figure below:
Select multiple graphics in batch and change the R value from 0.2 to another value?

 

[SLW210]

Are you looking for a LISP, Python, VBA, .NET, etc.?

 

I moved your thread to the AutoLISP, Visual LISP & DCL Forum.

[BIGAL]

Code what's that for ?

 

Join Fillet R 0.4 P pickobject enter

 

All done

[mhupp]

1 hour ago, BIGAL said:

Code what's that for ?

Join Fillet R 0.4 P pickobject enter

All done

 

Have to fillet the 3 long arcs segments before joining. But yes no lisp needed for simple task.

 

 

 

 

 

[BIGAL]

The large arc is like the base radius for all the teeth, so changing that may need a complete redraw. behind the shape must be some form of formula, or design rules.

 

Sounds like a custom gear.lsp is needed.

Edited Saturday at 02:30 AM by BIGAL

[Tsuky]

@amook147

Try this

With your exemple seem to work's...

mdf_gear.lsp

[SLW210]

Much like Elvis, the OP seems to have left the building.

 

In case there is a dramatic return, here is a LISP that should work, though unclear what "code" they want or or if this is for an actual plug-in.

 

Solved: Fillet multiple polyline all at once by lisp - Autodesk Community

 

I didn't look at Kent Cooper's version to prompt for a radius, but used the original and added something simple to it. I am sure Kent Cooper's is better.

 

(defun C:FMP_R (/ plss n rad)
  (setq rad (getdist "\nEnter fillet radius: "))
  (if (and rad (> rad 0.0))
    (progn
      (command "_.fillet" "_radius" rad)
      (if (setq plss (ssget "_:L" '((0 . "LWPOLYLINE"))))
        (repeat (setq n (sslength plss))
          (command "_.fillet" "_polyline"
                   (ssname plss (setq n (1- n))))
        )
      )
    )
  )
  (princ)
)

 

[Nikon]

Lee Mac has a similar code.

The FMP_R and fpoly codes perform conjugations with a given radius. 
Only in these codes it is impossible to set the value radius = 0. 
Is there a code for interfacing with a radius of 0?

There's also the marko_ribar code, but I couldn't verify it. When loading, the message appears: Unknown command.

 

Edited yesterday at 04:11 PM by Nikon

[SLW210]

Did you bother to check the link I posted?

 

The first one in my link from Kent Cooper will do fillet>R>0 if that is the value of  FILLETRAD.

 

https://forums.autodesk.com/t5/visual-lisp-autolisp-and-general/fillet-multiple-polyline-all-at-once-by-lisp/m-p/6473166#M130031

 

 

The FilletMultiplePolylines will work with 0 radius.

 

https://forums.autodesk.com/t5/visual-lisp-autolisp-and-general/fillet-multiple-polyline-all-at-once-by-lisp/m-p/10151411#M130041 

[Nikon]

1 hour ago, SLW210 said:

Did you bother to check the link I posted?

Unfortunately, I couldn't check, the link doesn't open for me...

[Nikon]

4 hours ago, SLW210 said:

https://forums.autodesk.com/t5/visual-lisp-autolisp-and-general/fillet-multiple-polyline-all-at-once-by-lisp/m-p/6473166#M130031

Can anyone attach a lisp from this link?

[GLAVCVS]

(defun C:FMP
(/ plss n)
(if (setq plss (ssget '((0 . "LWPOLYLINE"))))
(repeat (setq n (sslength plss))
(command "_.fillet" "_polyline" (ssname plss (setq n (1- n))))
); repeat
); if
(princ)

 

I guess this is it

[Nikon]

1 hour ago, GLAVCVS said:

(defun C:FMP
(/ plss n)
(if (setq plss (ssget '((0 . "LWPOLYLINE"))))
(repeat (setq n (sslength plss))
(command "_.fillet" "_polyline" (ssname plss (setq n (1- n))))
); repeat
); if
(princ)

This code should perform the pairing (without specifying the radius?). The code doesn't work: unknown command.

The parenthesis after (princ) is lost. +)

Edited 14 minutes ago by Nikon

[Nikon]

5 hours ago, SLW210 said:

The first one in my link from Kent Cooper will do fillet>R>0 if that is the value of  FILLETRAD.

The code can connect several polylines with a radius of 0.

I understood that FILLETRAD must be set beforehand.

Or do this:

(defun C:FMP0 ; = Fillet Multiple Polylines
  (/ plss n)
(setvar "FILLETRAD" 0)
  (if (setq plss (ssget '((0 . "LWPOLYLINE"))))
    (repeat (setq n (sslength plss))
      (command "_.fillet" "_polyline" (ssname plss (setq n (1- n))))
    ); repeat
  ); if
  (princ)
); defun

 

Edited 2 minutes ago by Nikon