Generating a Profile for a 147km Project

[Butterstone]

Dear All,

Excited to join this Forum.

 

I would appreciate guidance on how to achieve the below for a 147km Topographical Survey Project.

 

I want to generate a Profile in civil 3d 2018. I have a center line with elevations along the line at 24-25m intervals. I also have the CSV file with the Eastings and Northings coordinates of each of the points

 

The process should be automatic..

 

I have attached an image of what the profile should look like.

 

Your help is appreciated.

Thank You.

[SLW210]

I have moved your thread to the Civil 3D & LDD Forum, please post your Civil 3D questions in this forum.

[BIGAL]

A couple of ways to achieve this as it sounds like you only have the single Profile points, you can make a pline of the points ie XYZ, copy that pline left and right, you can use the points to make a TIN, using the central pline as an Alignment you can walk along the pline and make your Long section using the normal CIV3D road plot commands.