Draw cable tray T connection

Here's a quick way to make the radius tray ( no error checking on input )

(defun _makeradtray (w h r p)
 (entmake (list '(0 . "LWPOLYLINE")
        '(100 . "AcDbEntity")
        '(67 . 0)
        '(8 . "E-PWER-CABL-TRAY")
        '(100 . "AcDbPolyline")
        '(90 . 
        '(70 . 1)
        '(43 . 0)
        '(38 . 0)
        '(39 . 0)
        (cons 10 p)
        (cons 10 (setq p (list (+ w (car p)) (cadr p))))
        '(42 . 0.414213562373095)
        (cons 10 (setq p (list (+ r (car p)) (- (cadr p) r))))
        (cons 10 (setq p (list (car p) (- (cadr p) h))))
        (cons 10 (setq p (list (- (car p) (+ w (* 2. r))) (cadr p))))
        (cons 10 (setq p (list (car p) (+ (cadr p) h))))
        '(42 . 0.414213562373095)
        (cons 10 (setq p (list (+ r (car p)) (+ (cadr p) r))))
      )
 )
)
(_makeradtray
 (getdist "\nEnter Width: ")
 (getdist "\nEnter Height: ")
 (getdist "\nEnter Radius: ")
 (getpoint "\nPick a point to place the tray: ")
)

Hi,I am already modify your code to be hatched but I am stuck in rotate hatch and polyline can you modify it

thanks for help.

(command "_.hatch" "ANSI31" "0.0" "0.0" "_l"  ""  "_.change"  "_l" "" "_p"  "_la"  "E-PWER-CABL-HATCH" "")

why my reply not approved by admi?

Here's a quick way to make the radius tray ( no error checking on input )

(defun _makeradtray (w h r p)
 (entmake (list '(0 . "LWPOLYLINE")
	 '(100 . "AcDbEntity")
	 '(67 . 0)
	 '(8 . "E-PWER-CABL-TRAY")
	 '(100 . "AcDbPolyline")
	 '(90 . 
	 '(70 . 1)
	 '(43 . 0)
	 '(38 . 0)
	 '(39 . 0)
	 (cons 10 p)
	 (cons 10 (setq p (list (+ w (car p)) (cadr p))))
	 '(42 . 0.414213562373095)
	 (cons 10 (setq p (list (+ r (car p)) (- (cadr p) r))))
	 (cons 10 (setq p (list (car p) (- (cadr p) h))))
	 (cons 10 (setq p (list (- (car p) (+ w (* 2. r))) (cadr p))))
	 (cons 10 (setq p (list (car p) (+ (cadr p) h))))
	 '(42 . 0.414213562373095)
	 (cons 10 (setq p (list (+ r (car p)) (+ (cadr p) r))))
   )
 )
)
(_makeradtray
 (getdist "\nEnter Width: ")
 (getdist "\nEnter Height: ")
 (getdist "\nEnter Radius: ")
 (getpoint "\nPick a point to place the tray: ")
)

I'm all really modified your code to be hatched but I am stuck in rotate polyline and hatch can you modify please

Thanks for help

Try this:

(defun c:radtray (/ p)
 (defun _makeradtray (w h r p rot / doc e h)
   (if	(setq e	(entmakex (list	'(0 . "LWPOLYLINE")
			'(100 . "AcDbEntity")
			'(67 . 0)
			'(8 . "E-PWER-CABL-TRAY")
			'(100 . "AcDbPolyline")
			'(90 . 
			'(70 . 1)
			'(43 . 0)
			'(38 . 0)
			'(39 . 0)
			(cons 10 p)
			(cons 10 (setq p (list (+ w (car p)) (cadr p))))
			'(42 . 0.414213562373095)
			(cons 10 (setq p (list (+ r (car p)) (- (cadr p) r))))
			(cons 10 (setq p (list (car p) (- (cadr p) h))))
			(cons 10 (setq p (list (- (car p) (+ w (* 2. r))) (cadr p))))
			(cons 10 (setq p (list (car p) (+ (cadr p) h))))
			'(42 . 0.414213562373095)
			(cons 10 (setq p (list (+ r (car p)) (+ (cadr p) r) 0.0)))
		  )
	)
)
     (progn (setq doc (vla-get-activedocument (vlax-get-acad-object)))
     (setq h (vlax-invoke
	       (if (= (getvar 'cvport) 1)
		 (vla-get-paperspace doc)
		 (vla-get-modelspace doc)
	       )
	       'addhatch
	       achatchobject
	       "ANSI31"
	       :vlax-true
	     )
     )
     (vlax-invoke h 'appendouterloop (list (vlax-ename->vla-object e)))
     (vla-add (vla-get-layers doc) "E-PWER-CABL-HATCH")
     (vla-put-layer h "E-PWER-CABL-HATCH")
     (vlax-put h 'patternangle (getvar 'hpang))
     (vlax-put h 'patternscale (getvar 'hpscale))
     (vla-evaluate h)
     )
   )
   (if	rot
     (mapcar '(lambda (x) (vlax-invoke x 'rotate p rot)) (list (vlax-ename->vla-object e) h))
   )
 )
 (_makeradtray
   (getdist "\nEnter Width: ")
   (getdist "\nEnter Height: ")
   (getdist "\nEnter Radius: ")
   (setq p (getpoint "\nPick a point to place the tray: "))
   (getangle "\nRotation angle: " p)
 )
 (princ)
)
(vl-load-com)

Try this:

(defun _makeradtray (w h r p / doc e h)
 (if (setq e (entmakex	(list '(0 . "LWPOLYLINE")
		      '(100 . "AcDbEntity")
		      '(67 . 0)
		      '(8 . "E-PWER-CABL-TRAY")
		      '(100 . "AcDbPolyline")
		      '(90 . 
		      '(70 . 1)
		      '(43 . 0)
		      '(38 . 0)
		      '(39 . 0)
		      (cons 10 p)
		      (cons 10 (setq p (list (+ w (car p)) (cadr p))))
		      '(42 . 0.414213562373095)
		      (cons 10 (setq p (list (+ r (car p)) (- (cadr p) r))))
		      (cons 10 (setq p (list (car p) (- (cadr p) h))))
		      (cons 10 (setq p (list (- (car p) (+ w (* 2. r))) (cadr p))))
		      (cons 10 (setq p (list (car p) (+ (cadr p) h))))
		      '(42 . 0.414213562373095)
		      (cons 10 (setq p (list (+ r (car p)) (+ (cadr p) r))))
		)
      )
     )
   (progn (setq doc (vla-get-activedocument (vlax-get-acad-object)))
   (setq h (vlax-invoke
	     (if (= (getvar 'cvport) 1)
	       (vla-get-paperspace doc)
	       (vla-get-modelspace doc)
	     )
	     'addhatch
	     achatchobject
	     "ANSI31"
	     :vlax-true
	   )
   )
   (vlax-invoke h 'appendouterloop (list (vlax-ename->vla-object e)))
   (vla-add (vla-get-layers doc) "E-PWER-CABL-HATCH")
   (vla-put-layer h "E-PWER-CABL-HATCH")
   (vlax-put hatch 'patternangle (getvar 'hpang))
   (vlax-put hatch 'patternscale (getvar 'hpscale))
   (vla-evaluate hatch)
   )
 )
)
(vl-load-com)
(_makeradtray
 (getdist "\nEnter Width: ")
 (getdist "\nEnter Height: ")
 (getdist "\nEnter Radius: ")
 (getpoint "\nPick a point to place the tray: ")
)

Hi,ronjonp thanks for help,but I need to rotate hatch,polyline after create as specific angle.

Hi,ronjonp thanks for help,but I need to rotate hatch,polyline after create as specific angle.

Code modified above.