svizoman Posted March 20, 2018 Share Posted March 20, 2018 I wish to apply new generic material from google map satelite image to a 3d solid. The 3d soild (dimension 300m x 150m x 0.1m) will represent the land and will have a cut out of 10m x 14m - where the 3d building will be placed. First I made a printcreen of google satelite photo. I've cut the image to be in the ratio of 2.5 to 1.5. Then I created the box of 300m x 150m x 0.1m. Then I created new generic material of the google satelite image. I changed the size of the material image to 300.000 x 150.000 I applied new material to the box. Problems: 1. when i made the cut out to the box, material is all messed up 2. although google satelite image (jpg) is of good quality, quality in acad is poor (image quality is set to high) Quote Link to comment Share on other sites More sharing options...
SLW210 Posted March 20, 2018 Share Posted March 20, 2018 I have moved your thread to the Revit Architecture Forum since it appears you are using Revit Architecture according to your profile. Quote Link to comment Share on other sites More sharing options...
tzframpton Posted March 21, 2018 Share Posted March 21, 2018 This does not sound like a Revit based question. Quote Link to comment Share on other sites More sharing options...
SLW210 Posted March 21, 2018 Share Posted March 21, 2018 We won't know until the OP returns. Maybe, If/When they return, we can even get some files to see what's going on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.