AJSmith Posted September 23, 2009 Share Posted September 23, 2009 i have bounced this one around the office and had not real answer so its your turn i have attached a copy of the dynamic cut line block we are using so the question: when using the block you have a letter at each end so have 2 attributes saying the same is there anyway for setting it up so that you only enter the cut line suffix once and it appear at both ends ??? i did find that i could enter a field in Mtext to read the value of the attribute but this only set the field to the default setting and didnt change if the value did many thanks Adam CAD-BLK-01 Cut Line.dwg Quote Link to comment Share on other sites More sharing options...
chelsea1307 Posted September 23, 2009 Share Posted September 23, 2009 after you changed the value did you regen or do a qsave or a fieldupdate the fields dont automatically update with the change but these above will cause them to update Quote Link to comment Share on other sites More sharing options...
AJSmith Posted September 24, 2009 Author Share Posted September 24, 2009 think i did but will have another go to be sure Quote Link to comment Share on other sites More sharing options...
fuccaro Posted September 24, 2009 Share Posted September 24, 2009 How about putting letters from A to say H and add visibility states to the dynamic block? When using, you type nothing -choose the desired letter from the drop-down list. Quote Link to comment Share on other sites More sharing options...
AJSmith Posted October 5, 2009 Author Share Posted October 5, 2009 after you changed the value did you regen or do a qsave or a fieldupdate the fields dont automatically update with the change but these above will cause them to update tryed all the above and the field just shows the default vaule of the attribue any one else got any ideas ¿ CAD-BLK-01 Cut Line.dwg Quote Link to comment Share on other sites More sharing options...
chelsea1307 Posted October 5, 2009 Share Posted October 5, 2009 how did you go about creating the block with a field? Quote Link to comment Share on other sites More sharing options...
AJSmith Posted October 6, 2009 Author Share Posted October 6, 2009 how did you go about creating the block with a field? i created Mtext and inserted a Field (Ctrl+f) Quote Link to comment Share on other sites More sharing options...
chelsea1307 Posted October 6, 2009 Share Posted October 6, 2009 Is this just text or is it a block attribute? Quote Link to comment Share on other sites More sharing options...
AJSmith Posted October 7, 2009 Author Share Posted October 7, 2009 well i is just a text field so is set by the drawing not manualy like a attribute if that makes sence Quote Link to comment Share on other sites More sharing options...
chelsea1307 Posted October 7, 2009 Share Posted October 7, 2009 So the text is not part of a block then? Quote Link to comment Share on other sites More sharing options...
chelsea1307 Posted October 7, 2009 Share Posted October 7, 2009 I attached something similar to what you attached with working fields, is this what you are after? Drawing1.dwg Quote Link to comment Share on other sites More sharing options...
AJSmith Posted October 16, 2009 Author Share Posted October 16, 2009 spot on thats exactly what i want but i cant get it to work inside a block with an attribute any ideas Quote Link to comment Share on other sites More sharing options...
AJSmith Posted December 3, 2009 Author Share Posted December 3, 2009 i think i have done it had to use a block in a block but got it to work you can now edit the attribute of the cutline regen and both are adjusted CAD-BLK-01 Cut Line.dwg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.