sivapathasunderam Posted September 5, 2016 Share Posted September 5, 2016 Dear Gentlemen; I am using AutoCAD civil3d 2014 I prefer to have one more option as shown in an image below I have more works on Plan & again Plan works as below image thanks Siva Quote Link to comment Share on other sites More sharing options...
sivapathasunderam Posted September 7, 2016 Author Share Posted September 7, 2016 (edited) Hello anyone; There are many drawings we need Plan views without Profile In one sheet 2 Plans I try using Plan only option & cut the sheet 2 Plan viewport, bring to sheet 1 bottom area, the PC get struck (not responding) If this works for me, I can do this for same length like; 5, 10 or 20Km, but for more than these Kms not possible Example: 1.) Street Lighting Layouts, 2.) Topographic Survey Layouts, 3.) Existing Utility Services & Proposed Relocation Layouts, 4.) Land Acquisition Plans I look forward to hear from you thanks Siva Edited September 10, 2016 by sivapathasunderam added examples Quote Link to comment Share on other sites More sharing options...
sivapathasunderam Posted November 28, 2017 Author Share Posted November 28, 2017 No one reply!!! thanks Autodesk Quote Link to comment Share on other sites More sharing options...
BIGAL Posted November 29, 2017 Share Posted November 29, 2017 The only suggestion I can think of is to make all the sheets then use something like this copy layout to copy every second layout tab to the prior one then delete the blanks. You would need a custom sheet set maker for two sheets as the viewport needs to be rotated as you walk along an alignment. Change the paste insertion point ; copys a papersapce layout to another layout ; By Alan H Oct 2014 (defun C:cplay ( / alllayouts lay num x ans oldsnap) (setq oldsnap (getvar "osmode")) (setvar "osmode" 0) (setq oldtab (getvar "ctab")) (command "zoom" "E") (command "copybase" '(0 0 0) "W" '(0 48) '(801 554) "") (setq num (getint "\nEnter tab number")) (setq alllayouts (vla-get-Layouts (vla-get-activedocument (vlax-get-acad-object)))) (SETQ LAYNUM 0) (vlax-for lay alllayouts (if (= num (vla-get-taborder lay)) (setvar "ctab" (vla-get-name lay)) ) ; if ) ; for (command "zoom" "E") (command "move" "W" '(-900 36) '(820 570) "" '(0 0) '(-840 0)) (command "zoom" "E") (command "._pasteclip" '(0 0 0)) (setvar "osmode" oldsnap) (command "Regen") (setq ans (getstring "\nTo go back to original layout press <Cr> any key exit")) (if (= ans "")(setvar "ctab" oldtab)) (princ) ) ; defun Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.